⟐ Answer accepted Şubat 19, 2015 at 1:18 GMT-7

USB drive not found

I downloaded the Windows 10 Media Creation Tool but it doesn't detect the USB drive.

⟐ Answer edited Şubat 06, 2026 at 16:47 GMT-7

But it switches on properly problem is that it doesn't display on the screen not even with HDMI cable.

⟐ Answered Ekim 24, 2025 at 15:56 GMT-7

I was curious about the logic behind such behavior of the cooler, and also would like to inquire in advance before disassembly, whether the cooler may need some oil like WD-40 or grease, or should I plan for the cooler replacement. Is it a crappy HP design, or can it be expected in other laptops like Dell or Acer?

Recently I had a brief read about someone having fixed their monitor with a hairdryer, and a comment mentioned that this person might have actuated electrolytic capacitors by heating them with a hairdryer.

⟐ Commented Mayıs 14, 2022 at 14:58 GMT-7

EDIT: The whole motherboard is part number 494282-001, if that helps!

Hello, I am looking for HP G60's motherboard schematics, or someone who might know how to otherwise find the part number for the LCD connector that is soldered to the mother board (as pictured) - I Need to buy a new one, as the motherboard is otherwise flawless, and I have already de-soldered the previous one, but can't seem to find schematics / the part number for it, to buy a new one. Could anyone help? I really need this computer up and running =(.

-Chris

⟐ Answer accepted Temmuz 21, 2018 at 8:14 GMT-7

⟐ Answer accepted Haziran 29, 2018 at 5:59 GMT-7

⟐ Answer accepted Ekim 31, 2017 at 4:22 GMT-7

⟐ Answer accepted Ocak 16, 2017 at 14:15 GMT-7

⟐ Answer accepted Ağustos 19, 2016 at 9:43 GMT-7

i have laptop g60-249wm and also i cleaned the fan and fan is working correctly and i have already too cooling fan in down on notebook or laptop

and

always get a heat and i install some application that can read about heat then i see almost 100degrees celsius i got i dont know how im adjust the brightness that can more longer heat and it was -8 degrees celsius and now its 92deg......... but it still hot is there anything too make this low ???? im always sad because of this :( feeling bad with hp g60-249wm

i feel you answered this soon :(

⟐ Answer accepted Temmuz 29, 2016 at 6:49 GMT-7

⟐ Answer edited Eylül 20, 2015 at 23:40 GMT-7

⟐ Answer edited Ekim 31, 2023 at 15:03 GMT-7

⟐ Commented Aralık 13, 2024 at 7:25 GMT-7

There's at least one (left) hinge broken in the HP 250 G6 laptop: the plastic attaching the threads for hinge screws is actually broken. The repairers on Youtube use several types of glue:

1) epoxy 2-component adhesive "Araldite Standart" (1, 2)

2) a liquid superglue (Loctite) + baking soda (bicarbonate) (3, 4) or cyanoacrylate superglue + baking soda (5). The baking soda forms a type of a resin and probably is a substitute for the 2nd component (hardener) of an original 2-component epoxy adhesive.

Those who use epoxy 2-component adhesive attach the adhesive not only to the plastic which holds the threads for screws, but also to the metal surface of the hinge itself, thus making it apparently difficult to dismantle the whole hinge if necessary. However Araldite Standart epoxy glue allows long time (14-24 hours) of fixation.

Those using a superglue + baking soda combination apply it only to fix the threads for the hinge screws, which allows removing of the whole hinge if necessary to loosen it or etc. However baking soda may be spilled into unwanted locations by this technique.

My local electronics store told they won't sell 2-component epoxy adhesive Araldite Standart via the internet due to it being allegedly dangerous. I currently have an epoxy 2-component adhesive "Bison", but it seems to have some presumably toxic compounds as mentioned on the package and is of unknown quality. I also have some general type liquid superglue (not Loctite).

Which glue is better? Should I search for any 2-component epoxy adhesive or exactly Araldite Standart?

Thanks

⟐ Edited by author Ekim 28, 2022 at 11:21 GMT-7