Cihaz 15-20 dk çalıştıktan sonra bu ekran kayması bitiyor sadece üst kısımda bi kaç çizgi şeklinde bir titretme kalıyor.

Bu sorun neden kaynaklanıyor ? Daha önce böyle bir sorun yaşayan olduysa yardımcı olabilirseniz sevinirim .


Hello, while my laptop was not having any problems, suddenly the screen started to slip.

After the device runs for 15-20 minutes, this screen shift ends, only a few lines remain at the top.

Why does this problem occur? If anyone has had this problem before, I'd appreciate it if you could help.

Has anyone had any experience fixing or replacing this part?

MacBook Pro Retina

All Retina screen cables with hinges are compatible.

A1425 2012L 13" Retina could be tested with 13" or 15" 2013E Display. Unfortunately, 2013/13" Display has different Camera connector.
For testing 13 and 15 inch screens of the same generation are compatible
2012-E2013 are fully compatible
L2013-2014 are fully compatible
2015 is unique

I really need to know if this display is good before we attempt a repair as otherwise it is pointless to fix ...... @danj

⟐ Edited by author Temmuz 18, 2026 at 17:57 GMT-7

My 18 month old, MBP M4 Pro screen died. Took it to the ""Genius Bar"" to be told I had a faulty display!! Apparently this is quite a common fault with this model, my "genius" telling me he alone repairs at least four a day!!!!! If you're using this as intended and on a live event or important gig it may be worth having a spare USB C display to get you out of trouble (Command +F1 to switch).

The really annoying thing about the repair was that they wouldn't work on it unless it used the latest iteration of Mac OS, and threatened to wipe my hard drive before basically undoing some nuts and bolts and cables to replace the screen. I had to upgrade there and then to save the hassle of a later install from Time Machine.

This would've cost £623 to fix (I had AppleCare) BUT as I'm in the UK this was considered a 'Consumer Law Repair' which is up to 6 years in this country and also free.

⟐ Commented Temmuz 13, 2026 at 11:14 GMT-7

I have a 2" vertical strip on the left side of my screen that all of a sudden turned darker than the rest of my screen. It's tinted darker. I can still see the screen, but it flickers some, and at certain times I can vaguely see the browser's bookmark bar in the tinted section at the top. I can mirror the screen onto my TV, and the tinted strip isn't there. I did some research and think it may be the display cable. Does anyone have a repair guide for something like this?

⟐ Edited by author Temmuz 12, 2026 at 17:16 GMT-7

Mac was inside of suitcase and it was inside of a bag.

Mac boots up,I can hear the chime,but the screen is totally black,not even “light” black. Caps lock light doesn’t work.

I tried SMC,PRAM reset, didn’t work.

Reconnecting screen display by unplugging those two things didn’t work. I used this video

Reconnecting battery didn’t work.

I also tried SMC,PRAM reset while the battery was disconnected and Mac was getting energy from the charger. Didn’t work. I used that video.

What else can I do before changing the screen?I don’t want to swap screen cause it’s expensive.

⟐ Commented Temmuz 01, 2026 at 22:25 GMT-7

I’m looking for recommendations for good Apple repair shops experienced in microsoldering on Mac Book Pro logic boards.

⟐ Commented Haziran 29, 2026 at 5:05 GMT-7

⟐ Commented Haziran 28, 2026 at 13:44 GMT-7

I’ve tried entering DFU mode and it did not work.

There is no sound, and the display does not turn on at all. I had exactly the same issue with a slightly older MacBook, it really seems like this is a systematic issue. Does anyone have an idea if this is true and a possible fix?

⟐ Commented Nisan 26, 2026 at 13:09 GMT-7

⟐ Commented Nisan 13, 2026 at 16:54 GMT-7

⟐ Commented Şubat 24, 2026 at 2:36 GMT-7

⟐ Commented Şubat 21, 2026 at 16:13 GMT-7

Recently I changed the hard drive cable in my mid 2010 15" MBP (2.66GHz i7) after breaking it. I bought it from iFixit and it included a replacement SIL assembly. After replacing the part the cable works (hard drives boot when installed internally) but the SIL still doesn't work. I've reset the PRAM and SMC.

Does anyone have any ideas?

Thanks in advance

⟐ Commented Şubat 08, 2026 at 4:09 GMT-7

⟐ Commented Aralık 05, 2025 at 17:00 GMT-7

The pad via's have continuity with the via's to the corresponding test points

The problem is the laptop charges, works fine on battery power, but there is an X over battery, and does not give charge or % data. Im assuming a data line for battery status is having an issue somewhere.

Any one have any advice where I can look next? Im all out of ideas ;o/

Attached is the corresponding schematic area of the logic-board

Hi OT, sorry for bad photo. The original photo was before any work was done. the pads were in fact bridging, but here is the rework. the only pads not connected are the back legs, which are presumably to ground pad, but schematic reads No Connection.

`

Here is the reworked version

⟐ Commented Kasım 16, 2025 at 9:16 GMT-7

My fans are constantly running and they said it could be the sensors i'm wondering if it's worth to take off the logic board and check the little circuit underneath the logic build connecting to the fans?

The fan ribbon adapter on the top of the logic board was all fine and it really does not seem any water damage around any circuits etcetera considering there was a lot from a bucket falling

So the question would be should I bother taking a logic board off to check if the circuit connect to the fans underneath has a little corrosion Or does anyone think it's just sensors in general any help would be greatly appreciated?