iFixit - Answers With Device "Magic Bullet Blender"

Magic Bullet: Motor continues to run

Tue, 12 Dec 2017 06:20:47 -0700

The blender does not turn on easily. Then when the blender is removed the motor keeps running.

⟐ Answer accepted Aralık 12, 2017 at 6:20 GMT-7

Magic Bullet NutriBullet: Where can I find the clear plastic base gear attached inside?

Sat, 09 Dec 2017 12:25:20 -0700

Just recently the clear plastic circle that screws on the nut has broken. When i ordered a new base gear plastic circle it came with a golden screw in the middle. It does not fit! Please can you tell me where i can buy these replacements from? I can't seem to find them anywhere

It's the plastic ring that doesn't fit on the screw inside the blender

When it broke it made a loud snapping noise, I switched it off, lifted the container and the plastic ring was snapped in half.

I am now wondering if something is still attached to the screw that came out of the plastic ring because my new plastic ring does not fit and all the plastic rings on line to buy have a gold coloured screw in the middle.

⟐ Answer accepted Aralık 09, 2017 at 12:25 GMT-7

Magic Bullet NutriBullet: My NutriBullet gives a half spin and then stops

Tue, 22 Dec 2020 13:31:40 -0700

My NutriBullet gives a half spin and then stops

⟐ Answer edited Aralık 22, 2020 at 13:31 GMT-7

Magic Bullet NutriBullet: NutriBullet turns for only a few minutes

Tue, 22 Dec 2020 13:32:46 -0700

My nutribullet only stays on for a few seconds when I attach the cup to the base. It suddenly stopped turning on the other day and now it does not stay on even when pressing the cup into the base. I noticed some small metal balls came out of the base and the motor had a slight burning smell as though it was overheating. There is also a crack in the plastic part of the base that attaches to the blade on the cup base. I am wondering if anyone has had a similar problem or if anyone believes that replacing the cracked piece will fix it or if I should just buy a new one. Thanks!

⟐ Answer edited Aralık 22, 2020 at 13:32 GMT-7

Magic Bullet NutriBullet: loud bang and smoke coming from motor

Mon, 17 Jul 2017 04:57:42 -0700

I have had my nutribullet for approximately 3 weeks. I have been using according to al guidelines. This morning a few seconds after the motor shut off there was a loud bang and then smoke started coming from the motor with electric burn smell.

⟐ Answer accepted Temmuz 17, 2017 at 4:57 GMT-7

Magic Bullet NutriBullet: Why is my NutriBullet jamming?

Tue, 22 Dec 2020 12:48:19 -0700

Hi,

My nutribullet started to jam and it's getting harder to push the cup down so that it starts mixing the ingredients. What should I do?

Thanks

⟐ Edited Aralık 22, 2020 at 12:48 GMT-7

Magic Bullet MB1001B: Can't remove cup from base unit

Sun, 07 May 2017 08:21:56 -0700

I placed the cup on the base, pressed down and turned clockwise. I may have turned it too hard because I can't remove it. Is there a way to take it off?

⟐ Answer accepted Mayıs 07, 2017 at 8:21 GMT-7

Magic Bullet NutriBullet Pro: Blade in the cup is loose

Fri, 03 Feb 2017 00:06:06 -0700

the blade in the cup is loose and the liquid comes out the bottom how can I repair this.?

⟐ Answer accepted Şubat 03, 2017 at 0:06 GMT-7

Magic Bullet NutriBullet Pro: How do I reach the inside of my device?

Sun, 30 Oct 2016 21:32:36 -0700

My device is not working and something seems to be wrong internally. How do I access the inner components of my device without damaging it?

⟐ Answer accepted Ekim 30, 2016 at 21:32 GMT-7

Magic Bullet NutriBullet: My Nutribullet is not working in a unique way...

Tue, 25 Oct 2016 04:46:45 -0700

My nutribullet stopped working in the weirdest way possible. I have searched the internet everywhere to see if anyone has the same problem as me, but I can't find anything.

The cup can push into the bullet fine, it'll start and "blend" fine. But the lid... The part with the blender blades, it doesn't push down. It looks as if the lid is too big for the device. I don't understand it; I even bought a new lid and it still will not go down. I can't push it in all the way and blend it because I can't even move the lid down to start it. But like I said, without the lid, and the cup, it starts perfectly fine.

I'm guessing it has to do with the base of the bullet. it doesn't look crooked but something must have happened for it to be like this. Do you have and idea as to what?

I have only had my Nutribullet for 9 months. This happened a week ago.

⟐ Answer accepted Ekim 25, 2016 at 4:46 GMT-7

Magic Bullet NutriBullet: No power when I press into the base

Mon, 11 Jul 2016 20:38:35 -0700

When I press the container down in the base it connects but then nothing happens

I have tried changing the fuse but not joy

⟐ Answered Temmuz 11, 2016 at 20:38 GMT-7

Magic Bullet NutriBullet: Why is my motor smoking?

Mon, 02 Mar 2026 11:50:25 -0700

Motor smoking and smells like burned plastic?

Nutribullet 1200W: Why all my light is blinking green at the same time.

Mon, 24 Feb 2025 20:34:21 -0700

I recently got Nutri Bullet 1200watt and as soon as I got it i tried to blend smoothie but After 10 seconds the blender stops and all the light on my button started blinking at the same time. I also notice the motor was getting warm. I tried to do it after 15 minutes but same problem. Please help me with this problem. Thank You

⟐ Edited by author Şubat 24, 2025 at 20:34 GMT-7

Magic Bullet NutriBullet: How to prevent cup getting stuck on motor base.

Mon, 18 Dec 2023 08:49:15 -0700

My cup consistently gets stuck on the motor base. I can get it off but it's not easy and takes more time then it should. I hear a brand new one also can get stuck. I would like to know how to completely prevent this.

Magic Bullet: Operation switch get stack

Tue, 05 Sep 2023 08:15:28 -0700

Where i can get operation switch for Magic Bullet?

⟐ Edited by author Eylül 05, 2023 at 8:15 GMT-7

Magic Bullet NutriBullet: Magic bullet stuck in on position.

Thu, 09 Mar 2023 14:30:04 -0700

When I plug magic blender in it immediately goes on without cup attached. White lock/unlock tabs work freely.

Magic Bullet MB1001B: Plastic and rubber gears are super weak

Sun, 19 Feb 2023 05:19:28 -0700

We have purchased 2 Magic Bullets over the last 12 years or so, we still have the original Magic Bullet tucked away in our cabinet, but not one of them are working now because all the plastic and rubber gears are totally stripped away, I have spent a small fortune on replacement gears, but non of them last long I am now at the point of trying to find someone to make me a set of metal gears, if I had access to a machine shop I would try to do it myself what do you think about this idea?

Magic Bullet NutriBullet: Smoke came out of the NutriBullet

Tue, 21 Jun 2022 15:38:04 -0700

It started spinning even if the container is not yet fully and properly placed. The spinning power and sound was less thought. Then, smoke started coming out of the machine.

⟐ Commented Haziran 21, 2022 at 15:38 GMT-7

Magic Bullet NutriBullet: Plastic bit that controls blade is broke - replacement?

Sun, 10 Apr 2022 17:03:12 -0700

Hi! This plastic part that controls the blade moving has broke. All the plastic bits have broken off. I believe I just need to replace this part as everything else is still functional. Do you know where I could get a replacement just for this plastic bit? Thanks!

⟐ Commented Nisan 10, 2022 at 17:03 GMT-7

Magic Bullet NutriBullet: blue light flick on and off, and blender does not rotate.

Sat, 26 Mar 2022 18:58:19 -0700

Blue light on blender flickers on and off when switched on, the blender does not work.

⟐ Commented Mart 26, 2022 at 18:58 GMT-7