iFixit - Answers With Device "Robotic Vacuum Cleaner"

Xiaomi Mop Pro 2: Engel sensörü hatası problemi

Thu, 11 Apr 2024 00:48:39 -0700

Cihazımı çalıştırmak istediğimde engel sensörü hatası veriyor. Sensörler temiz ve sorun içermemesine rağmen cihaz çalışmıyor

Roborock S7: Yan fırça neden çıkıyor

Fri, 03 Jan 2025 21:13:07 -0700

Yan fırça çalışırken yerde buluyorum.Tornavida ile sıkıp tekrar yerine takıyorum.Makina çalışınca tekrar çıkıyor.Bir.çözüm yolu varmıdır?

⟐ Commented Ocak 03, 2025 at 21:13 GMT-7

Roborock S7: Şarj istasyonundan ayrılan aygıt kendini kapatıyor

Wed, 14 Jan 2026 16:19:01 -0700

Şarj istasyonundan ayrılan aygıt kendini kapatıyor ve istasyon haricinde hiçbir şekilde çalışmıyor

⟐ Answered Ocak 14, 2026 at 16:19 GMT-7

eufy RoboVac 35C: Robottan ses geliyor çalışırken

Wed, 03 Dec 2025 04:18:17 -0700

Robot süpürgemde her zaman ki çalışma sesinden farklı bir ses çıkartıyor sanki içerisine küçük bir şey kaçmış gibi ve de temizlik esnasında performansı düştü

⟐ Commented Aralık 03, 2025 at 4:18 GMT-7

Xiaomi Robotic Vacuum Cleaner: Temizlik yaparken durdu. Hiç hareket yok.

Fri, 24 Oct 2025 01:26:34 -0700

Evin wifi a en uzak odasını süpürürken aniden durdu ve bir daha çalışmadı. Ses yok hareket yok. Sadece güç düğmesi ve yanındaki düğme ışığı yanıp sönüyor. Mi home uygulamasi üzerinden hiç bir işlem yapılamıyor. Cihaz çevrimdışı diyor. Cihazı sıfırla dediğimde cihaz bulunamadı diyor. Manuel bağla dediğimde de aynı şekilde. Yardım sekmesinden yazdım ona da cevap gelmedi. Ümidim sizsiniz. Sorun ne ise parça değişimi falan yapabilirim ama hangi parça kaynaklı. Pil değişimi yaptık işe yaramadı.

⟐ Answered Ekim 24, 2025 at 1:26 GMT-7

Xiaomi Mop Pro 2: Robotta Pairing problem yaşıyorum

Thu, 24 Oct 2024 13:01:26 -0700

İki tuşa bastığımda pairing moda girmiyor

Xiaomi CDZ11RR: Su haznesinden su atmıyor. Silme işlemi yapamıyorum.

Tue, 20 Feb 2024 06:29:14 -0700

Essesial mop 2n1 var elimde. Silme işlemi yapmıyor.hazneden su gelmiyor

iRobot Roomba 5xx Series: Roomba keeps giving error 2 even when brushes are clean

Mon, 13 Apr 2026 08:33:07 -0700

have a 5xx ROOMBA keeps getting error 2 CLEAR BRUSHES. Brushes are clean and unie will work for maybe 10 - 15 minutes then get same message. when checking brushes they are clean. This keeps repeating.

⟐ Commented Nisan 13, 2026 at 8:33 GMT-7

iRobot Roomba 655 Pet Series: Why will my Roomba not charge?

Mon, 27 Apr 2026 22:07:58 -0700

I placed my Roomba on the charging station and left it there overnight. The next morning I tried to run the Roomba through a cleaning cycle, and it gave a low battery signal.

⟐ Commented Nisan 27, 2026 at 22:07 GMT-7

iRobot Roomba 4230: Vacuum will not go straight

Sun, 08 Jun 2025 04:08:25 -0700

I am having the "circle of death" problem with my Roomba Scheduler vacuum. Vacuum just turns around in a circle. Any solutions for this?

⟐ Commented Haziran 08, 2025 at 4:08 GMT-7

iRobot Roomba 5xx Series: When I turn my Roomba on, it doesn't go forward anymore.

Fri, 09 Apr 2021 15:57:19 -0700

Instead of going forward it spins around for a while and then starts to beep. Does anyone know how to fix this or what is causing it?

⟐ Answered Nisan 09, 2021 at 15:57 GMT-7

Neato Botvac D75: Error 3000 - Neato does not start moving

Tue, 19 Dec 2023 06:29:45 -0700

My Neato D85 has been working well. About 10 days ago, I changed its battery. It was working well until now. It gets ready to start but then stops and give me the message “press OK to continue (3000)”. I press OK and it tries to get ready but again stops and sends the same message.

What did I do? I cleaned its laser area with a cotton tip and pressured air too. Nothing. The disk moves though.

Any suggestions on what could happen but mainly how to fix it?

Thanks!

⟐ Answer accepted Aralık 19, 2023 at 6:29 GMT-7

iRobot Roomba 5xx Series: no power after fully charged & work for 4minutes then stop

Fri, 06 Jun 2025 07:26:14 -0700

after fully charged for days , the green light is on. then working good only for less than 5 minutes . the power button will turn red.then won't work till I recharged again.

⟐ Commented Haziran 06, 2025 at 7:26 GMT-7

Neato Botvac 80: Getting "Press OKAY to continue (3000)" error - help?

Tue, 23 Apr 2024 11:47:12 -0700

Error 3000 - Neato does not start moving

My Neato Botvac 80 has been working well. Today I changed its battery. It was working well until now. It gets ready to start but then stops and give me the message “press OK to continue (3000)”. I press OK and it tries to get ready but again stops and sends the same message.

What did I do? I cleaned its laser area with a cotton tip and pressured air too. Nothing. The disk moves though.

Any suggestions on what could happen but mainly how to fix it?

Thanks!

⟐ Answer accepted Nisan 23, 2024 at 11:47 GMT-7

Samsung NaviBot SR8855: circuit diagram or schematic for accu loading

Sat, 22 Jul 2017 10:15:46 -0700

The Bot Device cannot load his accu.

It does not recognized the contacts of the docking station. It still search and find the docking station well, but search endless the loading contacts.

I'm still good in electronics but do not have any schematics and don't kow any about the firmware/programms of a lot of microcontroller build in.

⟐ Commented Temmuz 22, 2017 at 10:15 GMT-7

iRobot Roomba 650: Resistance in right wheel/"error 5"

Sat, 07 Jun 2025 10:19:39 -0700

I've been getting the "Error 5 right" message on my Roomba 650. The right wheel seems to have twice the resistance of the left wheel. I took out the wheel module, opened it up and cleaned everything out. The problem persisted so I ordered a new wheel module. Still no luck. Then I noticed something very odd: the wheel has normal resistance when it's out of the Roomba but as soon as I lower it into place the resistance immediately doubles. Even with the battery removed this happens. I've very meticulously cleaned out the wheel well and it makes no difference. I've also cleaned the optical sensors and tried doing the Spot/Dock reset. Nothing. Any ideas??

⟐ Commented Haziran 07, 2025 at 10:19 GMT-7

iRobot Roomba 595 Pet Series: Why is my irobot showing err 5 while on the charger

Mon, 29 Jan 2024 12:56:24 -0700

My irobot is detecting an err 5 what does that mean.?

⟐ Answered Ocak 29, 2024 at 12:56 GMT-7

iRobot Roomba i7: How to stop my i7 from spinning in circles in one place?

Thu, 05 Mar 2026 17:26:20 -0700

When I tell my i7 to vacuum, it comes off of the dock about 3 feet, and proceeds to just spin in circles. The wheels are clean, and the trash bin is empty. I'm not sure what else to try. Any help would be appreciated, we've only had this robot for 2 months.

⟐ Commented Mart 05, 2026 at 17:26 GMT-7

Samsung POWERbot R7070: PowerBot R7040 Runs with disengaged powerbrush

Tue, 04 Jun 2024 17:23:15 -0700

my powerbot recently started to show this glitch where it actually runs pretending like it is cleaning but without actually vacuuming anything.(no powerbrush running) If i hit pause and then start again it starts and runs as expected. I’m not sure how often does this happen since it cleans mostly when I’m not home. I was only able to catch this on weekend.

⟐ Answered Haziran 04, 2024 at 17:23 GMT-7

iRobot Roomba 4100: will not turn on

Tue, 06 Dec 2022 23:15:40 -0700

charges, turns green,but will not turn and run

⟐ Commented Aralık 06, 2022 at 23:15 GMT-7