iFixit - Answers With Device "Tool"

Power Drill: Matkap ucu gevşiyor yerinden çıkıyor

Mon, 30 Mar 2026 02:21:53 -0700

Sıkma yada sökme sırasında matkap ucu gevşiyo

⟐ Answered Mart 30, 2026 at 2:21 GMT-7

Drill: Pil değişimi nasıl yapılır ustam

Fri, 24 Oct 2025 00:57:16 -0700

Pil değişimi nasıl yapılır

⟐ Commented Ekim 24, 2025 at 0:57 GMT-7

Black Decker Chainsaw: karbüratör tamiri avans ayarları

Wed, 05 Mar 2025 09:29:18 -0700

avans ayarları nasıl yapılıyor

DeWalt DC970: Tetik çalısmiyor motoru sağlam bataryası sağlam

Wed, 10 Apr 2024 22:32:44 -0700

Tetik mekanizmasındı arıza var

⟐ Answered Nisan 10, 2024 at 22:32 GMT-7

Black And Decker Cordless Drill LDX220 2015: Why is my drill just suddenly stops and when I turn it on a smoke cameo

Sat, 13 Jun 2026 19:15:07 -0700

My drill is b&d that you can change it into circular saw, impact, drill or anything. When try turning it on after re-applying the battery and pull the power a lil bit, there's a sound which indicates there's a power, but when I pull the power all the way it won't spin and suddenly a smoke came out on reverse button

⟐ Answered Haziran 13, 2026 at 19:15 GMT-7

Makita Hammer Drill XPH012 2016: nó ko hoạt động

Sat, 13 Jun 2026 19:06:28 -0700

cấm pin đầy đủ mà ko hoạt động

⟐ Answered Haziran 13, 2026 at 19:06 GMT-7

Circular Saw: See wonders when cutting

Sat, 13 Jun 2026 13:50:15 -0700

My Kobalt 6.5 I believe she’s isnkisaligned wonders sometime toward the end of cut I know. Blade is straight t

Ryobi Blower P21081 2017: Tool needed to remove fan blade?

Sat, 13 Jun 2026 00:17:48 -0700

What tool do i use/need to remove the fan blade so I can replace it

⟐ Answered Haziran 13, 2026 at 0:17 GMT-7

Campbell Hausfeld Air Compressor VT619600AJ 2014: How do I remove plastic belt housing?

Fri, 12 Jun 2026 10:44:45 -0700

How do I remove plastic belt housing?

Tool: LED Driver / Ballast for 8' LED Tube light

Fri, 12 Jun 2026 07:02:04 -0700

Hi

I am working on 8' LED tube light. It uses HOSSONI LED Driver (Ballast) SDC96CS200V48DL1A.
The light keeps flashing, so suspect defective LED Driver. I am looking for this driver.
If unavailable, kindly suggest a cross for above driver?

Pic attached.

Thanks

FixHub Portable Soldering Station: Intermittent "Tool Error: Sensor Disconnect" (Error #5) during heating - FixHub SLD101

Thu, 11 Jun 2026 12:39:44 -0700

I'm experiencing an intermittent "Tool Error: Sensor Disconnect" (Error Code #5) on my FixHub Portable Soldering Station during the heating phase.

Symptoms:

- While heating, the error flashes for ~1 second, the temperature display drops a few degrees, then heating resumes. This cycles repeatedly.

- Using firmware 1.5.0 on both Hub and Iron.

- Tip is a 1.5 Bevel.

Troubleshooting already performed:

- Verified tip is fully seated (clicked in, aligned below the surface).

- Cleaned 3.5mm contacts and internal handle springs with IPA.

- Disassembled the iron handle; internal soldering points for the socket are secure and show no signs of failure.

- Measured tip resistance at ~3 ohms at room temperature.

- Tested both front USB-C ports with the original cable (same result).

- Tested with third-party 100W cables (MacBook/IKEA), which resulted in Error #11 (No Data), confirming the hub requires the specific data lines of the original cable.

The intermittent nature suggests a thermal expansion break inside the tip's sensor circuit. Are there any known issues with this behavior or specific tests I can run to verify if it's the tip vs. the iron handle's internal logic?

⟐ Commented Haziran 11, 2026 at 12:39 GMT-7

Makita Nailer AN923 2016: Nail gun pin stuck out

Thu, 11 Jun 2026 09:38:01 -0700

I got a nail gun with the pin stuck out and doesn’t move

Air Compressor: How to set a switch one a 5 horse air compressor with a magnet switch

Thu, 11 Jun 2026 08:07:40 -0700

How to set a magnet switch on a air compressor

FixHub Portable Power Station: Power station working but display is not turning on

Tue, 09 Jun 2026 07:31:17 -0700

I received my soldering kit with power station a couple of weeks ago and when I first charged the power station with the display working well enough. Today I wanted to start soldering, but the display won't turn on. I'm able to see the power station in the web console and updated it to the latest FW without issues. The battery is shown to be at 100%.

However the display is still not functioning. Any help/tips appreciated.

⟐ Commented Haziran 09, 2026 at 7:31 GMT-7

MTD Tractor: Why does my power go down when I engage my blades

Mon, 08 Jun 2026 18:25:05 -0700

Why does my engine bog down

Craftsman Walk Behind Mower 91738885 2015: What type of oil this engine uses?

Mon, 08 Jun 2026 07:26:06 -0700

What type of oil this engine uses?

⟐ Commented Haziran 08, 2026 at 7:26 GMT-7

Black And Decker Reversible Drill 7250 TYPE A 2011: change my power cord

Mon, 08 Jun 2026 06:55:45 -0700

How do I change the power cord

Briggs and Stratton 675 Series Repair: Why is my Briggs & Stratton 675 series mower engine running too fast

Sun, 07 Jun 2026 13:53:19 -0700

Part way through my last mowing session, the engine suddenly started running at high revs, the accelerator lever does not alter the engine speed even though it works correctly. Is there an adjustment screw on the carburettor? Or is it a more serious issue.

⟐ Answered Haziran 07, 2026 at 13:53 GMT-7

Pressure Washer: Name this part: Craftsman electric pressure washer model 99016

Sun, 07 Jun 2026 10:34:41 -0700

Massive water leak and loss of pressure on Craftsman electric pressure washer model 99016. Teardown revealed a break in this water line component (should be one piece instead of two), measures about 3” x 4”. Unable to find a parts diagram for the internal workings; the diagram in the manual only contains external components like nozzles and detergent tanks. Purchased the unit on 6/8/2017 prior to the closure of our local Sears, not that long ago in my opinion, yet Sears Parts Direct cannot locate this model number. Without knowing the part number or even what to call it, our conversation went nowhere. Somewhere in the world there is box of these parts sitting on a shelf. Please help me find them!

In the event my search is futile, any advice on a workaround? JB Weld is the only trick on my mind at the moment.

⟐ Commented Haziran 07, 2026 at 10:34 GMT-7

TroyBilt Lawn Mower TB 100 11AB0BL723 2021: Trouble starting, guide or manual on how to clean carberator.

Sat, 06 Jun 2026 14:13:49 -0700

Lower has been sitting for sometime probably has old gas sitting in it how do I clean the carb and the fuel system to get it to Prime and start again.