iFixit - Answers With Device "iPad"

iPad 4 Wi-Fi: Replaced Wi-Fi antenna and still have grayed out Wi-Fi.

Wed, 28 Jun 2017 05:06:27 -0700

Hello! My Wi-Fi was grayed out on my iPad 4. After attempting network reset with no luck, I changed the antenna. My Wi-Fi and Bluetooth are still grayed out. Any idea how to repair this?

⟐ Answer accepted Haziran 28, 2017 at 5:06 GMT-7

iPad Mini: Horizontal and vertical colored lines after digitizer replaced

Thu, 25 May 2017 05:00:11 -0700

I replaced the digitizer screen on my mini ipad. Now i have colored lines on the lcd when it was working fine. I placed tape over exposed metal on digitizer. Any suggestions?

⟐ Answer accepted Mayıs 25, 2017 at 5:00 GMT-7

iPad Mini Wi-Fi: What are the parts I should buy?

Mon, 08 May 2017 07:25:28 -0700

Hi Guys,

I am trying to repair my ipad mini A1432, but I could not figure out what are the parts I need to buy to replace my crack screen..could someone please tell me what are the parts I need to buy to replace this crack screen.

P.S.-I already got necessary ifixit tool to open a device.

Thank you in advance.

⟐ Commented Mayıs 08, 2017 at 7:25 GMT-7

iPad Mini: 2 small components next to u2 ic

Mon, 08 May 2017 02:15:15 -0700

Hi,

Anyone know what are the 2 components missing in the picture next to the u2 ic?

Ipad Mini A1432

Thank you in advance

⟐ Answer unaccepted Mayıs 08, 2017 at 2:15 GMT-7

iPad Mini 2: iPad won't turn on and iTunes doesn't recognize it.

Fri, 21 Apr 2017 16:38:10 -0700

After a LCD and Digitizer repair, the iPad doesn't seem to turn on at all.

⟐ Answer accepted Nisan 21, 2017 at 16:38 GMT-7

iPad 2 Wi-Fi EMC 2415: LCD broken? Customer took home and broke? Dilemma..

Mon, 17 Apr 2017 04:28:59 -0700

I replaced the LCD glass and digitizer for a customer yesterday. Customer arrives tests everything and everything works. LCD works.

Customer takes home and contacts me that LCD is turning on but is disfigured..

What am I supposed to do?

http://imgur.com/NJLJOSc

http://imgur.com/BZDQeJE

Please look at these pics customer sent.

⟐ Answer accepted Nisan 17, 2017 at 4:28 GMT-7

iPad Wi-Fi: iPad 1st gen doesn't charge and isn't seen by computers?

Sat, 25 Mar 2017 15:36:15 -0700

My iPad 1st generation stopped charging and isn't being seen by any of my computers. I've tried to different chargers and three different cords. It just stopped working, no abuse, water or anything I can define. Just doesn't charge.

Jack

⟐ Commented Mart 25, 2017 at 15:36 GMT-7

iPad 3 Wi-Fi: The glass is gettin off, after replace, how I can paste it?

Tue, 14 Mar 2017 08:04:18 -0700

I´ve replaced the glass of my ipad 3rd generation, but a few days after that.. the glass start getting off near the home button zone...

What is the best way to paste the glass properly?? is it necessary to heat gun?

thanks and regards,

Marcos

⟐ Commented Mart 14, 2017 at 8:04 GMT-7

iPad 3 Wi-Fi: Charging problem after battery replacement

Tue, 28 Feb 2017 22:21:48 -0700

Replaced the battery on my iPad 3 today due to the old battery not charging. The problem I am having is after I replaced the battery the iPad now continuously connects and disconnects while plugged in. I have triple checked all of the connections and everything is plugged in properly and all connections are clean. Any idea as to why this is happening?

⟐ Commented Şubat 28, 2017 at 22:21 GMT-7

Ipad 2: wipe clean apple Ipad2

Tue, 24 Jan 2017 05:32:12 -0700

I am giving my ipad2 to my wife and I want to wipe clean so she can put her own preferences in ipad. My problem it has and old email address and password. I don't know the old password. how do I get around pass word to wipe ipad clean

⟐ Answer edited Ocak 24, 2017 at 5:32 GMT-7

iPad mini 4 Wi-Fi: Touch ID not working after screen replacement

Mon, 02 Jan 2017 19:05:46 -0700

So I attempted to replace a broken screen on the iPad mini 4. I successfully replaced the screen and home button but then realized the Touch ID isn't working. Of course, after the fact, I read how this can happen. I removed the home key and replaced to new screen but a small cable tore and unsure what exactly it does and how to repair. I took a picture but unsure how to upload. It's a small square to the left of the home key.

⟐ Answer accepted Ocak 02, 2017 at 19:05 GMT-7

iPad Air 2: Digitiser problem, not responding

Sun, 04 Dec 2016 12:41:48 -0700

Help!!!

I have recently purchased an iPad Air 2 off eBay. It was described as working but with a heavily damaged screen. I received the IPad and purchased an OEM LCD and digitiser all in one. After fixing the screen and the iPad booting up fine I found that the digitiser does not work. I rechecked the pins on the board and how they were seated and al was fine.....I eventually put this down to a faulty digitiser.

After sending the screen back and recieveig a replacement I went ahead fitted It, however the problem remains. I very much doubt I have another faulty digitiser so I'm thinking the problem lays elsewhere.

Could any one give me any ideas of what might be causing the problem? I'm out of ideas. I hope it's not a faulty logic board!

EDIT! CHECK THE PICTURES

Thanks in advance.

⟐ Commented Aralık 04, 2016 at 12:41 GMT-7

iPad Pro 12.9": Upgrade memory and change from wifi only to wifi & cellular

Wed, 30 Nov 2016 22:00:33 -0700

Is it possible to upgrade the memory on an I Pad Pro 12.9 and convert from wifi only to wifi & cellular?

⟐ Answered Kasım 30, 2016 at 22:00 GMT-7

iPad 3 Wi-Fi: iPad 3 32GB doesn't load nor sync, no visible reason

Wed, 02 Nov 2016 13:38:39 -0700

I have an iPad 3 32GB Wifi, that doesn't load nor sync, also in reset or DFU mode, as if there's a power supply or cable problem. However, the supply as well as cable works with other devices.

There is no visible reason in the connector as far as I can see. I plan to pick this apart. Any suggestions what to look for?

Other actions to take first? I still have about 50% battery left

⟐ Answer edited Kasım 02, 2016 at 13:38 GMT-7

iPad Mini 2 Wi-Fi: snapped off screw retainers on digitizer/lcd cover

Thu, 20 Oct 2016 03:30:41 -0700

I snapped off the middle screw retainer on the digitizer/lcd cover on an iPad mini 2. I was wondering first of all if it will affect anything. It doesn't seem to have any circuits or connections broken beneath it. Seems almost like it was glue under it. Second, can I use a special type of glue to place it back?

Thank you.

Here is a picture of the spot:

⟐ Commented Ekim 20, 2016 at 3:30 GMT-7

iPad: Cornering tool ipad, best tool for On-site repairs

Wed, 20 Mar 2019 17:15:04 -0700

Hi i am about to open an On-site repair shop, we come to clients, wondering what's the best tool to fix bended corner ipads, i know about g-tool and pliertek and some other devices you attached to a table, but what is the best if you are on the go?

Thanks

Sam

⟐ Edited Mart 20, 2019 at 17:15 GMT-7

iPad 2 Wi-Fi EMC 2415: Can the A5 processor be used in the iPad 1?

Thu, 08 Sep 2016 03:51:07 -0700

I would like to know if I could transplant the A5 processor for use in the iPad 1? Maybe I would need to move the RAM also? Any answer would help!

⟐ Commented Eylül 08, 2016 at 3:51 GMT-7

iPad 3 Wi-Fi: new screen but the touchscreen will not respond

Thu, 01 Sep 2016 12:02:48 -0700

I have a severely cracked glass screen. I replaced the screen with iFixit product. But now the glass screen will not respond to touch. Any suggestions on what is wrong?

⟐ Commented Eylül 01, 2016 at 12:02 GMT-7

iPad Air: Ghost touch + bottom portion of screen/home button unresponsive

Thu, 11 Aug 2016 07:08:47 -0700

I recently got a request to fix an iPad Air, the clients bag was damp and he put his iPad in it and the whole thing basically broke down.

1)ghost touch

2)every time he tried to charge it would turn on turn off if it made it to passcode screen it'd restart

3)home button no longer worked

After I opened screen I unplugged flex cables and cleaned them with isopropyl + also I stopped the ghost touch by using electrical tape to secure the flex cable on the digitizer down and fighting the digitizer cable connector to itself by wrapping electrical tape around it

Still after those this it the problem I ran into

4)bottom half of screen still no longer responsive

5)home button still unresponsive

What the !&&* is happening. This isn't anything like an iPhone repair.!?!?

⟐ Answered Ağustos 11, 2016 at 7:08 GMT-7

iPad 4 Wi-Fi: Ipad wont turn on after screen replacement

Sun, 03 Jul 2016 15:06:21 -0700

I changed ipad 4th gen screen followed all the steps and my screen won't turn on and I have tried to do a hard reset nothing happens nothing will come up on the screen.

⟐ Commented Temmuz 03, 2016 at 15:06 GMT-7