Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Yardım

Güncel sürümün sahibi: oldturkey03 (oy detayları) ,

Başlık:

During reassembly a small Magnet left behind

Metin:

I swapped out the optical drive from what was supposed to be a dead 12" PowerBook into a revived G4 iBook. (upon reassembly the PowerBook now works !!! What a technician I am !!!)

I followed the instructions provided on here (including the small round magnet under the keyboard, so this 'spare' magnet is not that one).

But once I was complete, I had a small rectangular magnet still sitting on my screw guide.  reviewed the instructions but found no reference to it.

It is approx 1/4" wide, 1/2" long and 1/8" thick.

Any clues where is goes?

BTW, I was also taking the PowerBook apart (other side of the table to prevent crossing parts). I found no reference to a magnet in those instructions either.

Cihaz:

iBook G4 12" 800 MHz-1.2 GHz

Durum:

open

Kabul Edilen Cevap:

10346

Düzenleyen: StevieB from ABQ ,

Başlık:

During reassembly a small Magnet left behind

Metin:

I swapped out the optical drive from what was supposed to be a dead 12" PowerBook into a revived G4 iBook. (upon reassembly the PowerBook now works !!! What a technician I am !!!)
 
I followed the instructions provided on here (including the small round magnet under the keyboard, so this 'spare' magnet is not that one).
 
But once I was complete, I had a small rectangular magnet still sitting on my screw guide. reviewed the instructions but found no reference to it.
 
It is approx 1/4" wide, 1/2" long and 1/8" thick.
 
Any clues where is goes?
 
BTW, I was also taking the PowerBook apart (other side of the table to prevent crossing parts). I found no reference to a magnet in those instructions either.
BTW, I was also taking the PowerBook apart (other side of the table to prevent crossing parts). I found no reference to a magnet in those instructions either.

Cihaz:

iBook G4 12" 800 MHz-1.2 GHz

Durum:

open

Düzenleyen: StevieB from ABQ ,

Başlık:

During reassembly a small Magnet left behind

Metin:

I swapped out the optical drive from what was supposed to be a dead 12" PowerBook into a revived G4 iBook. (upon reassembly the PowerBook now works !!! What a technician I am !!!)
 
I followed the instructions provided on here (including the small round magnet under the keyboard, so this 'spare' magnet is not that one).
 
But once I was complete, I had a small rectangular magnet still sitting on my screw guide. reviewed the instructions but found no reference to it.
 
It is approx 3/81/4" wide, 1/2" long and 1/8" thick.
It is approx 3/81/4" wide, 1/2" long and 1/8" thick.
 
Any clues where is goes?
 
BTW, I was also taking the PowerBook apart (other side of the table to prevent crossing parts).

Cihaz:

iBook G4 12" 800 MHz-1.2 GHz

Durum:

open

Orijinal gönderinin sahibi: StevieB from ABQ ,

Başlık:

During reassembly a small Magnet left behind

Metin:

I swapped out the optical drive from what was supposed to be a dead 12" PowerBook into a revived G4 iBook. (upon reassembly the PowerBook now works !!! What a technician I am !!!)

I followed the instructions provided on here (including the small round magnet under the keyboard, so this 'spare' magnet is not that one).

But once I was complete, I had a small rectangular magnet still sitting on my screw guide.  reviewed the instructions but found no reference to it.

It is approx 3/8" wide, 1/2" long and 1/8" thick.

Any clues where is goes?

BTW, I was also taking the PowerBook apart (other side of the table to prevent crossing parts).

Cihaz:

iBook G4 12" 800 MHz-1.2 GHz

Durum:

open