Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Yardım

Güncel sürümün sahibi: mayer (oy detayları) ,

Başlık:

May have accidentally bent this cable - What does it control?

Metin:

Just installed a SSD in my MacBook Pro 13" Unibody Mid-2009.  I also chose to remove my optical drive and install a hard drive in its place.  While doing the installation,  I had some trouble re-inserting a cable, and fear that I may have inadvertently bent it slightly.  It's a large/fairly thick cable near the fan on the motherobard; I had to remove it in order to access a screw that's underneath it.

The machine *appears* to be working fine, everything I've tested so far (sound, wifi, etc.) appears to be working as it should.  What is this cable for (i.e. is there something I can test to see if it's working or not)?

Picture of the cable I'm talking about is below.  Thanks!

[image|193402]

Cihaz:

MacBook Pro 13" Unibody Mid 2009

Durum:

open

Kabul Edilen Cevap:

106518

Orijinal gönderinin sahibi: dburr ,

Başlık:

May have accidentally bent this cable - What does it control?

Metin:

Just installed a SSD in my MacBook Pro 13" Unibody Mid-2009.  I also chose to remove my optical drive and install a hard drive in its place.  While doing the installation,  I had some trouble re-inserting a cable, and fear that I may have inadvertently bent it slightly.  It's a large/fairly thick cable near the fan on the motherobard; I had to remove it in order to access a screw that's underneath it.

The machine *appears* to be working fine, everything I've tested so far (sound, wifi, etc.) appears to be working as it should.  What is this cable for (i.e. is there something I can test to see if it's working or not)?

Picture of the cable I'm talking about is below.  Thanks!

[image|193402]

Cihaz:

MacBook Pro 13" Unibody Mid 2009

Durum:

open