Ana içeriğe geç
Yardım

Güncel sürümün sahibi: oldturkey03 ,

Metin:

Giovanni Riva, yes you can but it needs to be soldered and you need to repair the solder points. First off, the connector is a Samsung GT-B3310 - Flex Connector / FPC part number 3708-002015 and it is available at places [http://stellatech.com/samsung-gt-b3310-flex-connector-fpc,a,en,813337.html|like this] It is the touch screen connector It needs to be soldered onto the logic board. Get a soldering iron with a very fine tip and resolder it after you repair the traces, which could be difficult, you will have to remove the top green layer''' very carefully''' with a razor blade, exacto knife etc and then solder directly to those. Let us know if you are up to it and if you have the right tools.
Giovanni Riva, yes you can but it needs to be soldered and you need to repair the solder points. First off, the connector is a Samsung GT-B3310 - Flex Connector / FPC part number 3708-002015 and it is available at places [http://stellatech.com/samsung-gt-b3310-flex-connector-fpc,a,en,813337.html|like this] It is the touch screen connector It needs to be soldered onto the logic board. Get a soldering iron with a very fine tip and resolder it after you repair the traces, which could be difficult, you will have to remove the top green layer''' very carefully''' with a razor blade, exacto knife etc and then solder directly to those. Let us know if you are up to it and if you have the right tools.
 
[image|229149|align=left]
 
[image|229148|align=left]

Durum:

open

Orijinal gönderinin sahibi: oldturkey03 ,

Metin:

Giovanni Riva, yes you can but it needs to be soldered and you need to repair the solder points. First off, the connector is a Samsung GT-B3310 - Flex Connector / FPC part number 3708-002015 and it is available at places [http://stellatech.com/samsung-gt-b3310-flex-connector-fpc,a,en,813337.html|like this] It needs to be soldered onto the logic board. Get a soldering iron with a very fine tip and resolder it after you repair the traces, which could be difficult, you will have to remove the top green layer''' very carefully''' with a razor blade, exacto knife etc and then solder directly to those. Let us know if you are up to it and if you have the right tools.

[image|229149|align=left]

[image|229148|align=left]

Durum:

open