Ana içeriğe geç

Orijinal gönderinin sahibi: oldturkey03 ,


Usman Kayani, the very first thing I suggest is that you no longer try to turn it on or charge it. You do need to take care of the water damage, otherwise your device will corrode further, eventually leading to complete failure. Disassemble your device, use [|these guides]  and clean everything with a high grade (90%=) isopropyl alcohol and a small brush. Clean all connectors very thoroughly and check your board for missing or burned components. Do not forget the charging port. Then '''replace the battery'''. After that reassemble your device and re-evaluate. Hope this helps, good luck.