Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Yardım

Güncel sürümün sahibi: oldturkey03 (oy detayları) ,

Başlık:

No start up chime, fan rotates at a high speed, optical drive works

Metin:

I spilt water on to keyboard, so I dried it out, dismantled it and cleaned the logic board and reapplied thermal paste to the processor and video card.

The laptop was dead before cleaning, no power up.

After the cleaning, when i plug my magsafe charger, it would boot (fan and dvd). the power button was not working so i sorted the power button pads to boot the laptop to see if my battery was still good. It worked and now the power button works.

I am sure that the keyboard is dead, so I might have to get a new upper case.

My issue is that there is no video output or start up chime, it just stays blank, no video at all. I have used flash light behind the apple logo to see if the lcd back-light is gone but it was blank, so i don't think its the lcd.

Anyone have any experience with this issue?

Anyone knows what it means when your macbook pro powers on by itself when magsafe charger is plugged in?

And maybe any possible reason for no video?

Cihaz:

MacBook Pro 13" Unibody Late 2011

Durum:

open

Kabul Edilen Cevap:

142128

Düzenleyen: Adam Hintz ,

Başlık:

No start up chim, Fan rotating inchime, fan rotates at a high speed, optical drive works
No start up chim, Fan rotating inchime, fan rotates at a high speed, optical drive works

Metin:

Hi, this is my issue. i hope some one might knowI spilt water on to keyboard, so I dried it out, dismantled it and cleaned the answer or experiencelogic board and reapplied thermal paste to the problemprocessor and video card.
Hi, this is my issue. i hope some one might knowI spilt water on to keyboard, so I dried it out, dismantled it and cleaned the answer or experiencelogic board and reapplied thermal paste to the problemprocessor and video card.
 
it is water damaged, to start withThe laptop was dead before cleaning, no power up.
it is water damaged, to start withThe laptop was dead before cleaning, no power up.
 
i spilt water on to keyboard, soAfter the cleaning, when i dried it out, dismantledplug my magsafe charger, it would boot (fan and cleaneddvd). the logic board and reapplied thermal pastepower button was not working so i sorted the power button pads to boot the processorlaptop to see if my battery was still good. It worked and video cardnow the power button works.
i spilt water on to keyboard, soAfter the cleaning, when i dried it out, dismantledplug my magsafe charger, it would boot (fan and cleaneddvd). the logic board and reapplied thermal pastepower button was not working so i sorted the power button pads to boot the processorlaptop to see if my battery was still good. It worked and video cardnow the power button works.
 
the laptop was dead before cleaning, no power upI am sure that the keyboard is dead, so I might have to get a new upper case.
the laptop was dead before cleaning, no power upI am sure that the keyboard is dead, so I might have to get a new upper case.
 
however after the cleaning, when i plug my magsafe chargerMy issue is that there is no video output or start up chime, it would boot (fan and dvd).just stays blank, no video at all. I have used flash light behind the power button was not working so i sorted the power button pads to boot the laptopapple logo to see if my batterythe lcd back-light is gone but it was still good. it worked and nowblank, so i don't think its the power button workslcd.
however after the cleaning, when i plug my magsafe chargerMy issue is that there is no video output or start up chime, it would boot (fan and dvd).just stays blank, no video at all. I have used flash light behind the power button was not working so i sorted the power button pads to boot the laptopapple logo to see if my batterythe lcd back-light is gone but it was still good. it worked and nowblank, so i don't think its the power button workslcd.
 
i am sure that the keyboard is dead, so i mightAnyone have to get a new upper case.any experience with this issue?
i am sure that the keyboard is dead, so i mightAnyone have to get a new upper case.any experience with this issue?
 
but my issue is that there is no video output or start up chim,Anyone knows what it just stays blank, no video at all. i have used flash light behind the apple logo to see if the lcd back-lightmeans when your macbook pro powers on by itself when magsafe charger is gone but it was blank, so i don't think its the lcd.plugged in?
but my issue is that there is no video output or start up chim,Anyone knows what it just stays blank, no video at all. i have used flash light behind the apple logo to see if the lcd back-lightmeans when your macbook pro powers on by itself when magsafe charger is gone but it was blank, so i don't think its the lcd.plugged in?
 
anyone have any experience with this issue?

anyone knows what it means when your macbook pro powering on by itself when magsafe charger is pluged in?

and
And maybe any possible reason for no video?
anyone have any experience with this issue?

anyone knows what it means when your macbook pro powering on by itself when magsafe charger is pluged in?

and
And maybe any possible reason for no video?

Cihaz:

MacBook Pro 13" Unibody Late 2011

Durum:

open

Orijinal gönderinin sahibi: nick ,

Başlık:

No start up chim, Fan rotating in high speed, optical drive works

Metin:

Hi, this is my issue. i hope some one might know the answer or experience to the problem.

it is water damaged, to start with.

i spilt water on to keyboard, so i dried it out, dismantled it and cleaned the logic board and reapplied thermal paste to the processor and video card.

the laptop was dead before cleaning, no power up.

however after the cleaning, when i plug my magsafe charger, it would boot (fan and dvd). the power button was not working so i sorted the power button pads to boot the laptop to see if my battery was still good. it worked and now the power button works.

i am sure that the keyboard is dead, so i might have to get a new upper case.

but my issue is that there is no video output or start up chim, it just stays blank, no video at all. i have used flash light behind the apple logo to see if the lcd back-light is gone but it was blank, so i don't think its the lcd.

anyone have any experience with this issue?

anyone knows what it means when your macbook pro  powering on by itself when magsafe charger is pluged in?

and maybe any possible reason for no video?

Cihaz:

MacBook Pro 13" Unibody Late 2011

Durum:

open