Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Yardım

Güncel sürümün sahibi: oldturkey03 ,

Metin:

Fred turner, here is what I got:"
 
Reference designator R5001 0ohm 5% 1/10W 603 package resistor
 
Reference designator R5221 8.2Kohm 5% 1/16W 402 Package resistor
 
Reference designator R5220 8.2Kohm 5% 1/16W 402 Package resistor
 
Reference designator RD002 5% 1/16W 402 Package SENSOR_NONPROD:Y
 
Reference designator R5072 10K 5% 1/20W 201 Package resistor
 
Reference designator RD007 5% 1/16W 402 Package SENSOR_NONPROD:Y
 
Reference designator R5016 0ohm 5% 1/10W 603 package resistor
 
0ohm resistors are usually used as jumpers. It is easier to have machines place 0ohm resistors than to setup for wire jumpers. RD002 and RD007 are sensing resistors. May be tough to find. Hope this helps, good luck.
 
[image|365655|align=left]image|365655|align=center]

== Quick description ===

Reference designator R5001 SMC support circuitry
Reference designator R5221 SMBus Connections
Reference designator R5220 "SMLink 1" Connections
Reference designator RD002 DEBUG SENSORS AND ADC
Reference designator R5072 SMC support circuitry
Reference designator RD007 DEBUG SENSORS AND ADC
Reference designator R5016 Debug Power "Buttons" SMC on off
as you can see they are all pretty closely connected to the The System Management Controller (SMC) function of your computer.
[image|365655|align=left]image|365655|align=center]

== Quick description ===

Reference designator R5001 SMC support circuitry
Reference designator R5221 SMBus Connections
Reference designator R5220 "SMLink 1" Connections
Reference designator RD002 DEBUG SENSORS AND ADC
Reference designator R5072 SMC support circuitry
Reference designator RD007 DEBUG SENSORS AND ADC
Reference designator R5016 Debug Power "Buttons" SMC on off
as you can see they are all pretty closely connected to the The System Management Controller (SMC) function of your computer.

Durum:

open

Düzenleyen: oldturkey03 ,

Metin:

Fred turner, here is what I got:"
 
Reference designator R5001 0ohm 5% 1/10W 603 package resistor
 
Reference designator R5221 8.2Kohm 5% 1/16W 402 Package resistor
 
Reference designator R5220 8.2Kohm 5% 1/16W 402 Package resistor
 
Reference designator RD002 5% 1/16W 402 Package SENSOR_NONPROD:Y
 
Reference designator R5072 10K 5% 1/20W 201 Package resistor
 
Reference designator RD007 5% 1/16W 402 Package SENSOR_NONPROD:Y
 
Reference designator R5016 0ohm 5% 1/10W 603 package resistor
 
0ohm resistors are usually used as jumpers. It is easier to have machines placesplace 0ohm resistors than to setup for wire jumpers. RD002 and RD007 are sensing resistors. May be tough to find. Hope this helps, good luck.
0ohm resistors are usually used as jumpers. It is easier to have machines placesplace 0ohm resistors than to setup for wire jumpers. RD002 and RD007 are sensing resistors. May be tough to find. Hope this helps, good luck.
 
[image|365655|align=left]

Durum:

open

Orijinal gönderinin sahibi: oldturkey03 ,

Metin:

Fred turner, here is what I got:"

Reference designator R5001 0ohm 5% 1/10W 603 package resistor

Reference designator R5221 8.2Kohm 5% 1/16W 402 Package resistor

Reference designator R5220 8.2Kohm 5% 1/16W 402 Package resistor

Reference designator RD002 5% 1/16W 402 Package SENSOR_NONPROD:Y

Reference designator R5072 10K 5% 1/20W 201 Package resistor

Reference designator RD007  5% 1/16W 402 Package SENSOR_NONPROD:Y

Reference designator R5016 0ohm 5% 1/10W 603 package resistor

0ohm resistors are usually used as jumpers. It is easier to have machines places 0ohm resistors than to setup for wire jumpers. RD002 and RD007 are sensing resistors. May be tough to find. Hope this helps, good luck.

[image|365655|align=left]

Durum:

open