Ana içeriğe geç
Yardım

Güncel sürümün sahibi: oldturkey03

Metin:

Honda Civic, here is what the manual says:"
Power Mirror/Manual Mirror Replacement
1. Lower the door glass fully.
2. Carefully pry out the mirror mount cover (A) by hand in the sequence shown.
[image|376837|align=center]
3. On power mirror model: Disconnect the connector (A).
[image|376839|align=center]
-
4. While holding the mirror, remove the nuts securing the mirror, and remove the mirror
(manual mirror model).
5. On power mirror model: While holding the mirror, push out the connector clip (A),
and remove the mirror (B). Take care not to scratch the door.
[image|376838|align=center]
-
-6. Install the mirror in the reverse order of removal, and make sure the connector is
-
-plugged in properly (power mirror model).
+6. Install the mirror in the reverse order of removal, and make sure the connector is plugged in properly (power mirror model)."
+Hope this helps, good luck.

Durum:

open

Düzenleyen: oldturkey03

Metin:

Honda Civic, here is what the manual says:"
Power Mirror/Manual Mirror Replacement
1. Lower the door glass fully.
2. Carefully pry out the mirror mount cover (A) by hand in the sequence shown.
-[image|376837|align=left]
+[image|376837|align=center]
3. On power mirror model: Disconnect the connector (A).
-[image|376839|align=left]
+[image|376839|align=center]
+
4. While holding the mirror, remove the nuts securing the mirror, and remove the mirror
(manual mirror model).
5. On power mirror model: While holding the mirror, push out the connector clip (A),
and remove the mirror (B). Take care not to scratch the door.
-[image|376838|align=left]
+[image|376838|align=center]
+
6. Install the mirror in the reverse order of removal, and make sure the connector is
plugged in properly (power mirror model).

Durum:

open

Orijinal gönderinin sahibi: oldturkey03

Metin:

Honda Civic, here is what the manual says:"

Power Mirror/Manual Mirror Replacement

1. Lower the door glass fully.

2. Carefully pry out the mirror mount cover (A) by hand in the sequence shown.

[image|376837|align=left]

3. On power mirror model: Disconnect the connector (A).

[image|376839|align=left]

4. While holding the mirror, remove the nuts securing the mirror, and remove the mirror

(manual mirror model).

5. On power mirror model: While holding the mirror, push out the connector clip (A),

and remove the mirror (B). Take care not to scratch the door.

[image|376838|align=left]

6. Install the mirror in the reverse order of removal, and make sure the connector is

plugged in properly (power mirror model).

Durum:

open