Ana içeriğe geç
Yardım

Güncel sürümün sahibi: jessabethany ,

Metin:

This is a common problem that occurs if you do not put the screws in the right place for the metal shield that covers the lcd and digitizer connections. It's very important to make sure you lay out your screws when you remove them in the same order. There is one longer screw and if it's put into the wrong spot you can damage the logic board and get the blue screen of death error 9 or 14. Here is a diagram of the proper screw layout on youtube, although hard to read it gives you the layout. Try removing the screws and put them in the proper order. If your lucky it might resolve the problem. If it damaged the logic board too deep it is not repairable.https://www.youtube.com/watch?v=sDF2A2n3rg8

Hope
repairable.
Hope
this helps.....Bruce from Phonemedicnwa.comhelps.....
This is a common problem that occurs if you do not put the screws in the right place for the metal shield that covers the lcd and digitizer connections. It's very important to make sure you lay out your screws when you remove them in the same order. There is one longer screw and if it's put into the wrong spot you can damage the logic board and get the blue screen of death error 9 or 14. Here is a diagram of the proper screw layout on youtube, although hard to read it gives you the layout. Try removing the screws and put them in the proper order. If your lucky it might resolve the problem. If it damaged the logic board too deep it is not repairable.https://www.youtube.com/watch?v=sDF2A2n3rg8

Hope
repairable.
Hope
this helps.....Bruce from Phonemedicnwa.comhelps.....

Durum:

open

Orijinal gönderinin sahibi: brucemicki ,

Metin:

This is a common problem that occurs if you do not put the screws in the right place for the metal shield that covers the lcd and digitizer connections. It's very important to make sure you lay out your screws when you remove them in the same order. There is one longer screw and if it's put into the wrong spot you can damage the logic board and get the blue screen of death error 9 or 14. Here is a diagram of the proper screw layout on youtube, although hard to read it gives you the layout. Try removing the screws and put them in the proper order. If your lucky it might resolve the problem. If it damaged the logic board too deep it is not repairable.https://www.youtube.com/watch?v=sDF2A2n3rg8

Hope this helps.....Bruce from Phonemedicnwa.com

Durum:

open