Ana içeriğe geç
Yardım

Orijinal gönderinin sahibi: r0b ,

Metin:

I use a warming try that I bought fromthe thrift store for $3

put it on low with a cloth and set the assembly on

lt will heat to about 70c

then use a toothbrush and apply 99% rubbing alcohol to soften the glue

now use a thin tool of choice to slide through the layers do not push and pull

as you slide out dip the tool into the alcohol and re enter

this will help keep it from sticking and will keep the glue from resetting

the whole process is done on the tray

use a thermometer to check that the cloth stays within 10 degees of  70c (170f)

Durum:

open