Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Yardım

Güncel sürümün sahibi: mayer (oy detayları) ,

Başlık:

iPhone 6 dead after screen replacement (professional job)

Metin:

Hi all,

I run a professional phone repair business and have done several iphone 6 with no major issues so far.

Today I worked on an iPhone 6 repair. The repair was going good, had put the new screen on and everything was fine. Just then I realised the home button was not clicking properly, for there were some small glass chips around it; so I decided to remove it again and clean it. I did so without removing the screen ( turned the phone upside down to work on the button). I removed the button flex, cleaned it and put it back in. When I when to test it the screen didn't come on, the power button didn't help either.

I then tried the usual tricks (hold power + home button for 10s, unplug the battery and so). I have removed the screen and put it back, checked all the connectors, have tried with the original screen again and nothing has worked so far. Phone looks as it's dead. I have left it charging (no charging icon) with no luck. I run out of ideas, any suggestions from you wise people?

thanks in advance,

M

Cihaz:

iPhone 6

Durum:

open

Kabul Edilen Cevap:

231924

Düzenleyen: Miki ,

Başlık:

iPhone 6 dead after screen replacement (professional job)

Metin:

Hi all,
 
I run a professional phone repair business down under, repairing 800+ phones a yearand have done several iphone 6 with no major issues so far.
I run a professional phone repair business down under, repairing 800+ phones a yearand have done several iphone 6 with no major issues so far.
 
Today I worked on an iPhone 6 repair. The repair was going good, had put the new screen on and everything was fine. Just then I realised the home button was not clicking properly, for there were some small glass chips around it; so I decided to remove it again and clean it. I did so without removing the screen ( turned the phone upside down to work on the button). I removed the button flex, cleaned it and put it back in. When I when to test it the screen didn't come on, the power button didn't help either.
 
I then tried the usual tricks (hold power + home button for 10s, unplug the battery and so). I have removed the screen and put it back, checked all the connectors, have tried with the original screen again and nothing has worked so far. Phone looks as it's dead. I have left it charging (no charging icon) with no luck. I run out of ideas, any suggestions from you wise people?
 
thanks in advance,
 
MiquelM
MiquelM

Cihaz:

iPhone 6

Durum:

open

Orijinal gönderinin sahibi: Miki ,

Başlık:

iPhone 6 dead after screen replacement (professional job)

Metin:

Hi all,

I run a professional phone repair business down under, repairing 800+ phones a year.

Today I worked on an iPhone 6 repair. The repair was going good, had put the new screen on and everything was fine. Just then I realised the home button was not clicking properly, for there were some small glass chips around it; so I decided to remove it again and clean it. I did so without removing the screen ( turned the phone upside down to work on the button). I removed the button flex, cleaned it and put it back in. When I when to test it the screen didn't come on, the power button didn't help either.

I then tried the usual tricks (hold power + home button for 10s, unplug the battery and so). I have removed the screen and put it back, checked all the connectors, have tried with the original screen again and nothing has worked so far. Phone looks as it's dead. I have left it charging (no charging icon) with no luck. I run out of ideas, any suggestions from you wise people?

thanks in advance,

Miquel

Cihaz:

iPhone 6

Durum:

open