Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Yardım

Güncel sürümün sahibi: Errol ,

Başlık:

Thermal Pads vs Arctic Silver

Metin:

I'm going to need to replace the right blower on a PowerBook G4 FW800.

The instructions indicate that I have to remove the logic board so I'll need new thermal pads.

However, I was wondering if anyone has experience using arctic silver instead of the official thermal pads.

My guesstimation is that arctic silver applied properly would likely out-perform the pre-made pads however the heat sink may rely upon the spacing defined by the pads.

Anyone have suggestions?

Cihaz:

PowerBook G4 Aluminum 15" 1-1.5 GHz

Durum:

open

Kabul Edilen Cevap:

44304

Düzenleyen: David Hodson ,

Başlık:

Thermal Pads vs Arctic Silver

Metin:

I'm going to need to replace the right blower on a PowerBook G4 FW800.

The instructions indicate that I have to remove the logic board so I'll need new thermal pads.

However, I was wondering if anyone has experience using arctic silver instead of the official thermal pads.

My guesstimation is that arctic silver applied properly would likely out-perform the pre-made pads however the heat sink may rely upon the spacing defined by the pads.

Anyone have suggestions?

Cihaz:

PowerbookPowerBook G4 FW800Aluminum 15" 1-1.5 GHz
PowerbookPowerBook G4 FW800Aluminum 15" 1-1.5 GHz

Durum:

open

Orijinal gönderinin sahibi: Errol ,

Başlık:

Thermal Pads vs Arctic Silver

Metin:

I'm going to need to replace the right blower on a PowerBook G4 FW800.

The instructions indicate that I have to remove the logic board so I'll need new thermal pads.

However, I was wondering if anyone has experience using arctic silver instead of the official thermal pads.

My guesstimation is that arctic silver applied properly would likely out-perform the pre-made pads however the heat sink may rely upon the spacing defined by the pads.

Anyone have suggestions?

Cihaz:

Powerbook G4 FW800

Durum:

open