Ana içeriğe geç
Yardım

Orijinal gönderinin sahibi: Brad ,

Metin:

Relatively easy, the camera has a metal case over it, slide a small object into it, bend it out slightly, and lift off the metal case, the camera is mounted into a slot, which is what you see soldered to the board, once removed, it causes the camera based apps to hang and subsequently force close even with the front installed, my front cam, the harder of the two to remove, is now a "sensor" for the auto dimmer when asked.  You need a size 5 torx to get the six screws on the back out

Durum:

open