That means the chances of getting the phone back into a working state via recovery is 0%. You will have to attempt restoring the system software via download mode which is done by this:
(Before you follow the steps below, make sure your phone is turned off then booted to download mode by holding Volume Down, Home Button and power button. For a few seconds until the download mode confirmation dialog is shown. Make sure to accept booting that mode via volume keys when prompted.
You may need to restore the software on your phone via Samsung Kies. You do it via Tools > Firmware upgrade and initialization. This will prompt you to enter the model number and the serial number of the phone which is usually at the back of the phone or in the battery compartment.
If the Samsung Kies method does not allow you to download the firmware for your phone then you'll have to go to http://www.sammobile.com/firmwares/ where you type your model number of your phone to find the firmware for your phone. Make sure you choose latest version to the network it was mainly with.
Samfirmware instructions (After the file has finished downloading):
# Extract (unzip) the firmware file
# Download Odin v3.10.7
# Extract Odin ZIP file
# Open Odin v3.10.7
# Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
# Connect phone and wait until you get a blue sign in Odin
# Add the firmware file to AP / PDA
# Make sure re-partition is NOT ticked
# Click the start button, sit back and wait few minutes
# Before moving to step 11, you may want for it to get to the welcome screen as it sets up the phone.
# Wait until it says pass. It is then safe to unplug after that.
+
+
You can alternatively use the program called SamFirm to download samsung firmware at full speed (latest firmware updates only) or Updato (http://updato.com/firmware-archive-select-model) to download firmware too.
That means the chances of getting the phone back into a working state via recovery is 0%. You will have to attempt restoring the system software via download mode which is done by this:
(Before you follow the steps below, make sure your phone is turned off then booted to download mode by holding Volume Down, Home Button and power button. For a few seconds until the download mode confirmation dialog is shown. Make sure to accept booting that mode via volume keys when prompted.
You may need to restore the software on your phone via Samsung Kies. You do it via Tools > Firmware upgrade and initialization. This will prompt you to enter the model number and the serial number of the phone which is usually at the back of the phone or in the battery compartment.
If the Samsung Kies method does not allow you to download the firmware for your phone then you'll have to go to http://www.sammobile.com/firmwares/ where you type your model number of your phone to find the firmware for your phone. Make sure you choose latest version to the network it was mainly with.
Samfirmware instructions (After the file has finished downloading):
# Extract (unzip) the firmware file
# Download Odin v3.10.7
# Extract Odin ZIP file
# Open Odin v3.10.7
# Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
# Connect phone and wait until you get a blue sign in Odin
# Add the firmware file to AP / PDA
# Make sure re-partition is NOT ticked
# Click the start button, sit back and wait few minutes
# Before moving to step 11, you may want for it to get to the welcome screen as it sets up the phone.
# Wait until it says pass. It is then safe to unplug after that.