Ana içeriğe geç
Yardım

Orijinal gönderinin sahibi: Kenneth Allington ,

Metin:

Check your run capacitor 2.5,5,7.5, a big one might be ten uf.

If that's good check to see if it is wired into the auxiliary contacts of your compressor contactor.  If it should be and isn't. Try adding it in ( if your auxiliary is normal open"

Then see if there is a fan cycling switch on the high side.  Perhaps it isn't making like it should.  Put a meter on the switch and check for continuity once your pressures go up.

Durum:

open