Ana içeriğe geç
Yardım

Orijinal gönderinin sahibi: pollytintop ,

Metin:

There is no soldering needed on this part! Home button flex connects to top of dock flex not the motherboard.

If button is still responsive but needs more pressure try following guide to open iPhone, disconnect ribbons1,2,3. Turn display over and you should see the 2 gold prongs beneath home button- use a small flathead screw driver to gently lift them up. Clean top of dock to get rid of dust etc. Reassemble. Gold prongs get flattened with use, they should be pointing upwards approx 45• to make contact with dock

Durum:

open