Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Yardım

Güncel sürümün sahibi: oldturkey03 ,

Metin:

Now just scapped my second set of these scales. Both failed after 12-24 months.
 
Thanks for the teardown. I managed to get in, but no loose wires or clear problem area to fix.
 
I took photos along the way. See google docs.
 
https://goo.gl/photos/gmzFWdz769qiL42f6
[image|1159493][image|1159491][image|1159492][image|1159494][image|1159497][image|1159496][image|1159495][image|1159489][image|1159490][image|1159488]
The center disc came off very easily, but the 4 corner adhesive pads too quite a bit of leverage.
 
Also I had to cut the wire to the centre disc to remove the glass plate. The plan was to solder this back together if I got it working. The display ribbon cable came out by releasing the catch, but the circuit board was glued to the back plate.
 
Unless it is a loose wire, you would need to be an electronic engineer to fix it.

Durum:

open

Düzenleyen: Duncan Maidens ,

Metin:

Now just scapped my second set of these scales. Both failed after 12-24 months.
 
Thanks for the teardown. I managed to get in, but no loose wires or clear problem area to fix.
I took photos along the way. See google docs.
https://goo.gl/photos/gmzFWdz769qiL42f6
The center disc came off very easily, but the 4 corner adhesive pads too quite a bit of leverage.
Also I had to cut the wire to the centre disc to remove the glass plate. The plan was to solder this back together if I got it working. The display ribbon cable came out by releasing the catch, but the circuit board was glued to the back plate.
Unless it is a loose wire, you would need to be an electronic engineer to fix it.

Durum:

open

Orijinal gönderinin sahibi: Duncan Maidens ,

Metin:

Now just scapped my second set of these scales. Both failed after 12-24 months.

Thanks for the teardown. I managed to get in, but no loose wires or clear problem area to fix.

Durum:

open