Ana içeriğe geç
Yardım

Güncel sürümün sahibi: mayer (oy detayları) ,

Başlık:

Is this inclination of the LCD plug on the logic board normal?

Metin:

The LCD plug of my Late 2009 iMac 27-inch is slightly at an angle, as shown on the picture below.

It's slightly loose as when I press it down with my finger, it moves back down, parallel to the logic board.

Is this normal, or is the pin supposed to be parallel to the logic board and solidly secured to it?

I found that I need to stick something on the LCD cable so that it enters the plug at an angle, otherwise there is nothing displayed on the LCD.

[image|1029610]

Cihaz:

iMac Intel 27" EMC 2309 and 2374

Durum:

open

Kabul Edilen Cevap:

378396

Düzenleyen: Alex222 ,

Başlık:

Is this inclination of the LCD plug on the logic board normal?

Metin:

The LCD plug of my Late 2009 iMac 27-inch is slightly at an angle, as shown on the picture below.
 
It's slightly loose as when I press it down with my finger, it movemoves back down, parallel to the logic board, when I press it down with my fingerboard.
It's slightly loose as when I press it down with my finger, it movemoves back down, parallel to the logic board, when I press it down with my fingerboard.
 
Is this normal, or is the pin supposed to be parallel to the logic board and solidly secured to it?
 
I found that I need to stick something on the LCD cable so that it enters the plug at an angle, otherwise there is nothing displayed on the LCD.
 
[image|1029610]

Cihaz:

iMac Intel 27" EMC 2309 and 2374

Durum:

open

Düzenleyen: Alex222 ,

Başlık:

Is this inclination of the LCD plug on the logic board normal?

Metin:

The LCD plug of my Late 2009 iMac 27-inch is slightly at an angle, as shown on the picture below.
 
It's slightly loose as it move back down, parallel to the logic board, when I press it down with my finger.
 
Is this normal, or is the pin supposed to be parallel to the logic boardboard and solidly secured to it?
Is this normal, or is the pin supposed to be parallel to the logic boardboard and solidly secured to it?
 
I found that I need to stick something on the LCD cable so that it enters the plug at an angle, otherwise there is nothing displayed on the LCD.
 
[image|1029610]

Cihaz:

iMac Intel 27" EMC 2309 and 2374

Durum:

open

Orijinal gönderinin sahibi: Alex222 ,

Başlık:

Is this inclination of the LCD plug on the logic board normal?

Metin:

The LCD plug of my Late 2009 iMac 27-inch is slightly at an angle, as shown on the picture below.

It's slightly loose as it move back down, parallel to the logic board, when I press it down with my finger.

Is this normal, or is the pin supposed to be parallel to the logic board?

I found that I need to stick something on the LCD cable so that it enters the plug at an angle, otherwise there is nothing displayed on the LCD.

[image|1029610]

Cihaz:

iMac Intel 27" EMC 2309 and 2374

Durum:

open