Ana içeriğe geç
Yardım

Güncel sürümün sahibi: Dan ,

Metin:

Yes, the connector has been yanked from the logic board. Most likely someone pulled on the cable when removing the display or pulled it away when trying to disconnect the cable.
 
I would be careful here as the connecter is now floating so only the solder joints are holding thingsthings together (very fragile). A good pull or press could snap the connection of one or more pins to the logic board.
I would be careful here as the connecter is now floating so only the solder joints are holding thingsthings together (very fragile). A good pull or press could snap the connection of one or more pins to the logic board.
 
If you have over stressed things here you'll need to replace the logic board, Ouch!

Durum:

open

Orijinal gönderinin sahibi: Dan ,

Metin:

Yes, the connector has been yanked from the logic board. Most likely someone pulled on the cable when removing the display or pulled it away when trying to disconnect the cable.

I would be careful here as the connecter is now floating so only the solder joints are holding things. A good pull or press could snap the connection of one or more pins to the logic board.

If you have over stressed things here you'll need to replace the logic board, Ouch!

Durum:

open