Ana içeriğe geç
Yardım

Güncel sürümün sahibi: oldturkey03 ,

Metin:

@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. You need the wiring diagram for that. I got this from the manual
[image|1178359]
Now you need to figure out on the board view which point is what. Going back to your image and checking the layout and schematic it appears that connecting a switch the way as pointed out in my pictures should work.
-[image|1178370][image|1178368][image|1178371]
+
+[image|1178370]
+
+[image|1178368]
+
+[image|1178371]
+always double check with a meter to make sure that you do not close any power to ground circuit.

Durum:

open

Düzenleyen: oldturkey03 ,

Metin:

@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. You need the wiring diagram for that. I got this from the manual
[image|1178359]
-Now you need to figure out on the board view which point is what.
+Now you need to figure out on the board view which point is what. Going back to your image and checking the layout and schematic it appears that connecting a switch the way as pointed out in my pictures should work.
+[image|1178370][image|1178368][image|1178371]

Durum:

open

Düzenleyen: oldturkey03 ,

Metin:

-@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. you need the wiring diagram. I got this from the manual
+@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. You need the wiring diagram for that. I got this from the manual
[image|1178359]
Now you need to figure out on the board view which point is what.

Durum:

open

Orijinal gönderinin sahibi: oldturkey03 ,

Metin:

@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. you need the wiring diagram. I got this from the manual

[image|1178359]

Now you need to figure out on the board view which point is what.

Durum:

open