Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Yardım

Güncel sürümün sahibi: Megan Hamrick ,

Başlık:

HOT Home Button! Reach ability worksUnresponsive hot home button, but home button does notreach ability works
HOT Home Button! Reach ability worksUnresponsive hot home button, but home button does notreach ability works

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.
 
I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.
 
I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.
 
Also, I am using the original home button. It says Touch ID works, I can’t set it up but it isn’t greyed out either. Reachibility works, which is linked to the touch sensor, but the home button itself doe not work.
Also, I am using the original home button. It says Touch ID works, I can’t set it up but it isn’t greyed out either. Reachibility works, which is linked to the touch sensor, but the home button itself doe not work.
 
And yes, it clicks.
And yes, it clicks.
 
Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.
 
EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.

Cihaz:

iPhone 6

Durum:

open

Düzenleyen: Megan Hamrick ,

Başlık:

Recovery mode every time it dies and is plugged inHOT Home Button! Reach ability works, but home button does not
Recovery mode every time it dies and is plugged inHOT Home Button! Reach ability works, but home button does not

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.
 
I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.
 
I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.
 
Also, I am using the original home button. It says Touch ID works, I can’t set it up but it isn’t greyed out either. Reachibility works, which is linked to the touch sensor, but the home button itself doe not work.
 
And yes, it clicks.
 
Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.
 
EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.

Cihaz:

iPhone 6

Durum:

open

Düzenleyen: Megan Hamrick ,

Başlık:

Home button Unresponsive, but boots to recovery by itselfRecovery mode every time it dies and is plugged in
Home button Unresponsive, but boots to recovery by itselfRecovery mode every time it dies and is plugged in

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.

I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.

I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.

Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.

EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.

Cihaz:

iPhone 6

Durum:

open

Düzenleyen: Megan Hamrick ,

Başlık:

Is there such a thing as Ghost Home Button?Home button Unresponsive, but boots to recovery by itself
Is there such a thing as Ghost Home Button?Home button Unresponsive, but boots to recovery by itself

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.

I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.

I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.

Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.

EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.

Cihaz:

iPhone 6

Durum:

open

Düzenleyen: Megan Hamrick ,

Başlık:

HELP: plugged in, boots into recovery.Is there such a thing as Ghost Home Screen - no home buttonButton?
HELP: plugged in, boots into recovery.Is there such a thing as Ghost Home Screen - no home buttonButton?

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.

I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.

I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.

Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.

EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.

Cihaz:

iPhone 6

Durum:

open

Düzenleyen: Megan Hamrick ,

Başlık:

Home Button doesnt work, butHELP: plugged in when deadin, boots to recovery?into recovery. Home Screen - no home button
Home Button doesnt work, butHELP: plugged in when deadin, boots to recovery?into recovery. Home Screen - no home button

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.

I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.

I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.

Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.

EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.

Cihaz:

iPhone 6

Durum:

open

Düzenleyen: Megan Hamrick ,

Başlık:

HELP:Home Button doesnt work, but plugged in,in when dead boots into recovery. Normal mode - no home buttonto recovery?
HELP:Home Button doesnt work, but plugged in,in when dead boots into recovery. Normal mode - no home buttonto recovery?

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.

I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.

I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.

Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.

EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.

Cihaz:

iPhone 6

Durum:

open

Düzenleyen: Megan Hamrick ,

Başlık:

WhenHELP: plugged in, boots into recovery. Normal mode - no home button
WhenHELP: plugged in, boots into recovery. Normal mode - no home button

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.

I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.

I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.

Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.

EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.

Cihaz:

iPhone 6

Durum:

open

Düzenleyen: Megan Hamrick ,

Başlık:

Does Ghost Home Button exist?!When plugged in, boots into recovery. Normal mode - no home button
Does Ghost Home Button exist?!When plugged in, boots into recovery. Normal mode - no home button

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.

I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.

I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.

Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.

EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.

Cihaz:

iPhone 6

Durum:

open

Düzenleyen: Megan Hamrick ,

Başlık:

boots into recovery, but home button won't work normallyDoes Ghost Home Button exist?!
boots into recovery, but home button won't work normallyDoes Ghost Home Button exist?!

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.
 
I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.
 
I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.
 
Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.
Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.
 
EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.

Cihaz:

iPhone 6

Durum:

open

Düzenleyen: Megan Hamrick ,

Başlık:

boots into recovery, but home button won't work normally

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.
 
I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.
 
I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.
 
Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.

EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.
Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.

EDIT: I forgot to mention that this phone was a repair. It was stuck in boot loop and I repaired the iOS software and got it back to normal, well almost.

Cihaz:

iPhone 6

Durum:

open

Orijinal gönderinin sahibi: Megan Hamrick ,

Başlık:

boots into recovery, but home button won't work normally

Metin:

Okay, I have an iPhone 6. The home button is unresponsive at the home screen and normal operating, but here's the weird part. When it completely dies, I plug it in and it shows the low battery symbol, and when it gets enough power it boots into Recovery Mode. This implies the iPhone thinks the home button is being pushed when It power cycles, but no response when booted back into normal mode.

I have tested numerous screens, all of which do that same thing. Except, the home buttons work on other iPhones.

I have had another iPhone do this, it was a 6S Plus. Did the same thing so I asssumrd I damaged the home button cable. But that was not the case, because later on, I took that screen, scrubbed the connectors with rubbing alcohol and the home button worked perfectly fine on another device.

Could I have damaged something on the board? I never put the screws back in for the screen connectors cover, so no long screw damage. I am stumped, please help.

Cihaz:

iPhone 6

Durum:

open