Ana içeriğe geç
Yardım

Güncel sürümün sahibi: Carroll Stroh ,

Başlık:

Ribbon cable came off a Brookstone 4 in 1 touchscreen clock

Metin:

-[image|1561508] It appears the ribbon cable had been glued to the contacts. Only solution so far is to use 3M electrically conducting tape. Any other suggestions? The attached image shows the space constraint inside the housing. The 19 gold tabs are where the ribbon cable attaches.
+[image|1562460][image|1561508]
+
+It appears the ribbon cable had been glued to the contacts. Only solution so far is to use 3M electrically conducting tape. Any other suggestions? The attached image shows the space constraint inside the housing. The 19 gold tabs are where the ribbon cable attaches.

Cihaz:

Clock

Durum:

open

Düzenleyen: Carroll Stroh ,

Başlık:

Ribbon cable came off a Brookstone 4 in 1 touchscreen clock

Metin:

-It appears the ribbon cable had been glued to the contacts. Only solution so far is to use 3M electrically conducting tape. Any other suggestions?
+[image|1561508] It appears the ribbon cable had been glued to the contacts. Only solution so far is to use 3M electrically conducting tape. Any other suggestions? The attached image shows the space constraint inside the housing. The 19 gold tabs are where the ribbon cable attaches.

Cihaz:

+Clock

Durum:

open

Orijinal gönderinin sahibi: Carroll Stroh ,

Başlık:

Ribbon cable came off a Brookstone 4 in 1 touchscreen clock

Metin:

It appears the ribbon cable had been glued to the contacts. Only solution so far is to use 3M electrically conducting tape. Any other suggestions?

Cihaz:


               
            
                     

Durum:

open