Skip to main content
Help

Current version by: Isaac ,

Text:

Clean the contacts and try again. If that doesn’t work, then there must be a loose wire inside or something.
 
I couldn’t find any specifics for getting to the electronics, but most guides to cleaning and restitching the dolls start with removing the zip-tie that holds the head on. You might find a point of ingress into the circuitry from there.
 
This video goes over a repair of the talking cabbage patch circuitry, but doesn’t show disassembly
This video goes over a repair of the talking cabbage patch circuitry, but doesn’t show disassembly
 
https://www.youtube.com/watch?v=bEw_2XUcYAM
 
 
 
This video is poor quality, but shows someone getting inside of the snack time cabbage patch doll.
 
 
 
https://www.youtube.com/watch?v=0z9rBiROLLc

Durum:

open

Edit by: Isaac ,

Text:

Clean the contacts and try again. If that doesn’t work, then there must be a loose wire inside or something.
 
I couldn’t find any specifics for getting to the electronics, but most guides to cleaning and restitching the dolls start with removing the zip-tie that holds the head on. You might find a point of ingress into the circuitry from there.
 
This video goes over a repair of the circuitry, but doesn’t show disassembly
 
https://www.youtube.com/watch?v=bEw_2XUcYAM
 
This video goes over a repair of the circuitry, but doesn’t show disassembly
 
https://www.youtube.com/watch?v=bEw_2XUcYAM
This video is poor quality, but shows someone getting inside of the snack time cabbage patch doll.



https://www.youtube.com/watch?v=0z9rBiROLLc
https://www.youtube.com/watch?v=bEw_2XUcYAM
This video is poor quality, but shows someone getting inside of the snack time cabbage patch doll.



https://www.youtube.com/watch?v=0z9rBiROLLc

Durum:

open

Edit by: Isaac ,

Text:

Clean the contacts and try again. If that doesn’t work, then there must be a loose wire inside or something.
 
I couldn’t find any specifics for getting to the electronics, but most guides to cleaning and restitching the dolls start with removing the zip-tie that holds the head on. You might find a point of ingress into the circuitry from there.
 
 
I couldn’t find any specifics for getting to the electronics, but most guides to cleaning and restitching the dolls start with removing the zip-tie that holds the head on. You might find
This video goes over
a pointrepair of ingress into the circuitry from there.circuitry, but doesn’t show disassembly

https://www.youtube.com/watch?v=bEw_2XUcYAM
I couldn’t find any specifics for getting to the electronics, but most guides to cleaning and restitching the dolls start with removing the zip-tie that holds the head on. You might find
This video goes over
a pointrepair of ingress into the circuitry from there.circuitry, but doesn’t show disassembly

https://www.youtube.com/watch?v=bEw_2XUcYAM

Durum:

open

Edit by: Isaac ,

Text:

Clean the contacts and try again. If that doesn’t work, then there must be a loose wire inside or something.
 
 
 
I couldn’t find any specifics for getting to the electronics, but most guides to cleaning and restitching the dolls start with removing the zip-tie that holds the head on. You might find a point of ingress into the circuitry from there.

Durum:

open

Original post by: Isaac ,

Text:

Clean the contacts and try again.  If that doesn’t work, then there must be a loose wire inside or something.

Durum:

open