Ana içeriğe geç
Yardım

Orijinal gönderinin sahibi: chris ,

Metin:

Locking/Releasing the Carriage

Locking and releasing the Carriage is shown below.

1. Remove the Decoration Plate Right. (Refer to 8.3.4.6 Decoration Plate Left/Right

(p.179).)

2. Insert a phillips screwdriver into the hole on the right side of the frame, and rotate

the white shaft of the Ink System Unit.

Figure 8-2. Release the Carriage Lock

8.3.4 Removing the Housings

8.3.4.1 Paper Support Assy

1. While pulling out the left and right guide pins of the Paper Support Assy, remove

the Paper Support Assy.

Figure 8-3. Removing the Paper Support Assy

Durum:

open