Ana içeriğe geç
Yardım

Güncel sürümün sahibi: Dan

Metin:

It can! It depends on the cleaner. They are designed to fire off from water.
Frankly, I rarely use an ultrasonic cleaner on a logic board. It’s only if the board has corrosion or a residue (liquid damage).
-I use an [https://www.eastwood.com/true-power-rechargeable-sprayer.html?SRCCODE=PLA00020&gclid=Cj0KCQiA-8PjBRCWARIsADc18TLwSjeJyKP6RPw9dIHXKBeavjQUhssb96lPsblJKqw9gqdZQkQEQkUaAtI9EALw_wcB|Rechargeable Air Sprayer] which I load with different solutions depending on what I’m dealing with. This allows me to focus the cleaning Vs doing the whole board.
+I use a [https://www.eastwood.com/true-power-rechargeable-sprayer.html?SRCCODE=PLA00020&gclid=Cj0KCQiA-8PjBRCWARIsADc18TLwSjeJyKP6RPw9dIHXKBeavjQUhssb96lPsblJKqw9gqdZQkQEQkUaAtI9EALw_wcB|Rechargeable Air Sprayer] which I load with different solutions depending on what I’m dealing with. This allows me to focus the cleaning Vs doing the whole board.

Durum:

open

Düzenleyen: Dan

Metin:

It can! It depends on the cleaner. They are designed to fire off from water.
Frankly, I rarely use an ultrasonic cleaner on a logic board. It’s only if the board has corrosion or a residue (liquid damage).
-I use an [https://www.eastwood.com/true-power-rechargeable-sprayer.html?SRCCODE=PLA00020&gclid=Cj0KCQiA-8PjBRCWARIsADc18TLwSjeJyKP6RPw9dIHXKBeavjQUhssb96lPsblJKqw9gqdZQkQEQkUaAtI9EALw_wcB|Rechargeable air sprayer] which i load with different solutions depending on what I’m dealing with. This allows me to focus the cleaning Vs doing the whole board.
+I use an [https://www.eastwood.com/true-power-rechargeable-sprayer.html?SRCCODE=PLA00020&gclid=Cj0KCQiA-8PjBRCWARIsADc18TLwSjeJyKP6RPw9dIHXKBeavjQUhssb96lPsblJKqw9gqdZQkQEQkUaAtI9EALw_wcB|Rechargeable Air Sprayer] which I load with different solutions depending on what I’m dealing with. This allows me to focus the cleaning Vs doing the whole board.

Durum:

open

Orijinal gönderinin sahibi: Dan

Metin:

It can! It depends on the cleaner. They are designed to fire off from water.

Frankly, I rarely use an ultrasonic cleaner on a logic board. It’s only if the board has corrosion or a residue (liquid damage).

I use an [https://www.eastwood.com/true-power-rechargeable-sprayer.html?SRCCODE=PLA00020&gclid=Cj0KCQiA-8PjBRCWARIsADc18TLwSjeJyKP6RPw9dIHXKBeavjQUhssb96lPsblJKqw9gqdZQkQEQkUaAtI9EALw_wcB|Rechargeable air sprayer] which i load with different solutions depending on what I’m dealing with. This allows me to focus the cleaning Vs doing the whole board.

Durum:

open