Ana içeriğe geç
Yardım

Güncel sürümün sahibi: Rick ,

Başlık:

2nd partition not booting/no drive designationdesignation--SOLVED
2nd partition not booting/no drive designationdesignation--SOLVED

Metin:

I installed (not live) a Linux O.S. onto the 2nd partition of this flashdrive. It won’t boot and there’s no “drive” letter designation.(in MSWin it should be F.G, etc in GParted it should be sdb2/sdc/2) When I go to either Win disk mgmt. or GParted, the area for changing/adding a drive letter is grayed out.. The second partition is active, primary and set to “boot”. First partition is active and primary. What I want to accomplish is assigning a drive letter so (I believe ??) the comp will recognize the second partition and then, boot up.

[SanDisk Cruzer Glide 3.0/256Gb   1st partition; 200Gb (aprox 126Gb used) active, primary   2nd partition; 33.5 Gb (LM 19.1 uses 8Gb) primary, active w/ flag set to boot.]

Cihaz:

Sandisk Cruzer 4GB

Durum:

open

Kabul Edilen Cevap:

570325

Düzenleyen: Rick ,

Başlık:

2nd partition not booting/no drive designation

Metin:

I installed (not live) a Linux O.S. onto the 2nd partition of this flashdrive. It won’t boot and there’s no “drive” letter designation.(in MSWin it should be F.G, etc in GParted it should be sdb2/sdc/2) When I go to either Win disk mgmt. or GParted, the area for changing/adding a drive letter is grayed out.. The second partition is active, primary and set to “boot”. First partition is active and primary. What I want to accomplish is assigning a drive letter so (I believe ??) the comp will recognize the second partition and then, boot up.

[SanDisk Cruzer Glide 3.0/256Gb   1st partition; 200Gb (aprox 126Gb used) active, primary   2nd partition; 33.5 Gb (LM 19.1 uses 8Gb) primary, active w/ flag set to boot.]

Cihaz:

Sandisk Cruzer 4GB

Durum:

open

Kabul Edilen Cevap:

570325

Orijinal gönderinin sahibi: Rick ,

Başlık:

2nd partition not booting/no drive designation

Metin:

I installed (not live) a Linux O.S. onto the 2nd partition of this flashdrive. It won’t boot and there’s no “drive” letter designation.(in MSWin it should be F.G, etc in GParted it should be sdb2/sdc/2) When I go to either Win disk mgmt. or GParted, the area for changing/adding a drive letter is grayed out.. The second partition is active, primary and set to “boot”. First partition is active and primary. What I want to accomplish is assigning a drive letter so (I believe ??) the comp will recognize the second partition and then, boot up.

[SanDisk Cruzer Glide 3.0/256Gb   1st partition; 200Gb (aprox 126Gb used) active, primary   2nd partition; 33.5 Gb (LM 19.1 uses 8Gb) primary, active w/ flag set to boot.]

Cihaz:

Sandisk Cruzer 4GB

Durum:

open