Ana içeriğe geç
Yardım

Orijinal gönderinin sahibi: Brad Perkins ,

Metin:

I had the same issue, I managed to repair the cable using copper conductive tape purchased from Amazon.  I carefully scraped away some of the insulating covering until I had a conductive surface on both pieces of the antenna. (Checked this using continuity mode on my multi-meter) then bridged the two pieces with the copper tape.  Then I covered the repair with capton tape to insulate it.  I reinstalled in the surface using capton tape to secure it and I did not use any screen adhesive in that area (to avoid making it too thick) I can confirm that the wifi is working perfectly again.

Durum:

open