Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Yardım

Güncel sürümün sahibi: B Mac ,

Metin:

See https://pbase.com/brucemac/2019octdisplay for my successful conversion from a 24” iMac (Early 2009) to a monitor. The inverter board is built into this display, but you’ll need 24Vdc to drive it - Thus, you’ll need a power supply. (unless you can figure out how to make the original PSU work…)
 
=== Update (12/01/2020) ===
I’ve added a diagram of the boards & cable routing to the display:
 
https://a4.pbase.com/o12/88/791988/1/171252938.eNRalSmb.DisplayCardSchematic.pnghttps://pbase.com/image/171252938
https://a4.pbase.com/o12/88/791988/1/171252938.eNRalSmb.DisplayCardSchematic.pnghttps://pbase.com/image/171252938
 
Help that hopes!!

Durum:

open

Düzenleyen: B Mac ,

Metin:

See https://pbase.com/brucemac/2019octdisplay for my successful conversion from a 24” iMac (Early 2009) to a monitor. The inverter board is built into this display, but you’ll need 24Vdc to drive it - Thus, you’ll need a power supply. (unless you can figure out how to make the original PSU work…)
 
=== Update (12/01/2020) ===
I’ve added a diagram of the boards & cable routing to the display:
 
https://a4.pbase.com/o12/88/791988/1/171252938.eNRalSmb.DisplayCardSchematic.png
 
Help that hopes!!

Durum:

open

Düzenleyen: B Mac ,

Metin:

See https://pbase.com/brucemac/2019octdisplay for my successful conversion from a 24” iMac (LateEarly 2009) to a monitor. The inverter board is built into this display, but you’ll need 24Vdc to drive it - Thus, you’ll need a power supply. (unless you can figure out how to make the original PSU work…)
See https://pbase.com/brucemac/2019octdisplay for my successful conversion from a 24” iMac (LateEarly 2009) to a monitor. The inverter board is built into this display, but you’ll need 24Vdc to drive it - Thus, you’ll need a power supply. (unless you can figure out how to make the original PSU work…)

Durum:

open

Orijinal gönderinin sahibi: B Mac ,

Metin:

See https://pbase.com/brucemac/2019octdisplay for my successful conversion from a 24” iMac (Late 2009) to a monitor.  The inverter board is built into this display, but you’ll need 24Vdc to drive it - Thus, you’ll need a power supply.  (unless you can figure out how to make the original PSU work…)

Durum:

open