This guide helpful : https://resetkey.net/how-to-clean-a-canon-ink-absorber-after-reset-5b00-error.html
+
This guide helpful
'''Thinks and tools needed to clean Canon printer waste ink absorber:'''
-
[quote]+ Latex gloves – make sure your hands are not dirty
+
[quote]
+
+ Latex gloves – make sure your hands are not dirty
+ Prepare paper towels
+ A large bowl
-
+ And a little detergent[/quote]
+
+ And a little detergent
+
[/quote]
'''=> Follow these steps sequentially to clean the waste ink absorber tray'''
'''Step 1:''' Wear rubber gloves to ensure your hands do not stick ink, pour warm water into the bowl, get the dishwashing liquid ready.
'''Step 2:''' Open the ink tank. Depending on your Canon printer model, this may be in the front or the back of the device.
Then wait for the cartridge to move out, and then unplug the printer’s power cable.
'''Step 3:''' Look for a black rubber frame under the cartridge assembly. This is where the ink absorption pads.
'''Step 4:''' Pull the rubber frame out of the printer and remove the ink absorbent sponge. The number of gaskets varies by model.
'''Step 5:''' Put the gasket in the bowl. Rub and squeeze them to remove ink. When the water becomes cloudy with ink, remove the solution and fill the bowl with warmer soap water. Continue this procedure until all the ink is removed from the ink absorbent sponge.
'''Step 6:''' After cleaning the absorbent sponge, squeeze excess water from the sponge and place them on a stack of three or four paper towels to dry.
– Check the pads every hour to determine if they are dry. If paper towels become saturated, change them out. Can use a dryer to dry at a small level.
'''Step 7:''' Put the ink absorbent sponge back into the rubber frame as they dry completely. Insert into printer, reinstall cartridge.
'''Step 8:''' Press and hold the “Power” button and reconnect the power cord.
When the printer is on, release the button.
Wait for five seconds and press the “Power” button again.
This resets the printer’s internal memory and overwrites the error code “5B00 error”.
-
– [https://resetkey.net/download|'''Download Canon Resetter here'''] and reset 5B00 error.
This guide helpful : https://resetkey.net/how-to-clean-a-canon-ink-absorber-after-reset-5b00-error.html
'''Thinks and tools needed to clean Canon printer waste ink absorber:'''
[quote]+ Latex gloves – make sure your hands are not dirty
+ Prepare paper towels
+ A large bowl
+ And a little detergent[/quote]
'''=> Follow these steps sequentially to clean the waste ink absorber tray'''
'''Step 1:''' Wear rubber gloves to ensure your hands do not stick ink, pour warm water into the bowl, get the dishwashing liquid ready.
'''Step 2:''' Open the ink tank. Depending on your Canon printer model, this may be in the front or the back of the device.
Then wait for the cartridge to move out, and then unplug the printer’s power cable.
'''Step 3:''' Look for a black rubber frame under the cartridge assembly. This is where the ink absorption pads.
'''Step 4:''' Pull the rubber frame out of the printer and remove the ink absorbent sponge. The number of gaskets varies by model.
'''Step 5:''' Put the gasket in the bowl. Rub and squeeze them to remove ink. When the water becomes cloudy with ink, remove the solution and fill the bowl with warmer soap water. Continue this procedure until all the ink is removed from the ink absorbent sponge.
'''Step 6:''' After cleaning the absorbent sponge, squeeze excess water from the sponge and place them on a stack of three or four paper towels to dry.
– Check the pads every hour to determine if they are dry. If paper towels become saturated, change them out. Can use a dryer to dry at a small level.
'''Step 7:''' Put the ink absorbent sponge back into the rubber frame as they dry completely. Insert into printer, reinstall cartridge.
'''Step 8:''' Press and hold the “Power” button and reconnect the power cord.
When the printer is on, release the button.
Wait for five seconds and press the “Power” button again.
This resets the printer’s internal memory and overwrites the error code “5B00 error”.
– [https://resetkey.net/download|'''Download Canon Resetter here'''] and reset 5B00 error.