Ana içeriğe geç
Yardım

Güncel sürümün sahibi: Nick

Metin:

-The problem with the rMBP chassis is there are no screw points, so you cannot bypass the double sided tape method sadly. You can probably replace it with weaker tape that comes up easier, but has the same thickness but that’s it.
+The problem with the rMBP chassis is there are no screw points, so you cannot bypass the double sided tape method sadly. You can probably replace it with weaker tape that comes up easier, but the thickness has to be exact or very close - as in a few mm thinner at most.
The problem is taking the factory tape off of the battery is a high risk procedure as well.

Durum:

open

Orijinal gönderinin sahibi: Nick

Metin:

The problem with the rMBP chassis is there are no screw points, so you cannot bypass the double sided tape method sadly. You can probably replace it with weaker tape that comes up easier, but has the same thickness but that’s it.

The problem is taking the factory tape off of the battery is a high risk procedure as well.

Durum:

open