Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Yardım

Güncel sürümün sahibi: Brad ,

Metin:

CONFIRMED. Steam solenoid valve was the problem. Please note that the replacement Jura part for USA must be the 120V version, not the 230V version used in Europe. They are unfortunately more than twice the price from what @vauweh shared with us in his posts, and as of Jan 2021 both jura-parts.com and partsguru.com are out of stock.
 
Here is the USA part I used for my C9, but it’s designed for C, F, S and X machines
 
Jura-parts: https://www.jura-parts.com/Jura-F-S-X-Series-Solenoid-Valve-p/10237.htm
 
Parts Guru: https://shop.partsguru.com/Jura-Steam-Solenoid-Valve-120V-0010528.htm?categoryId=-1[br]https://shop.partsguru.com/Jura-Steam-Solenoid-Valve-120V-0010528.htm?categoryId=-1
Parts Guru: https://shop.partsguru.com/Jura-Steam-Solenoid-Valve-120V-0010528.htm?categoryId=-1[br]https://shop.partsguru.com/Jura-Steam-Solenoid-Valve-120V-0010528.htm?categoryId=-1
 
[br]Parts Guru also has a conversion kit for older S machines, which lets you use this valve instead of the original, which is apparently no longer available https://shop.partsguru.com/Jura-Steam-Solenoid-Valve-120V-Conversion-Kit-0010529.htm?categoryId=-1
[br]Parts Guru also has a conversion kit for older S machines, which lets you use this valve instead of the original, which is apparently no longer available https://shop.partsguru.com/Jura-Steam-Solenoid-Valve-120V-Conversion-Kit-0010529.htm?categoryId=-1
 
would be great to find a DIY approach here. good luck!!
would be great to find a DIY approach here. good luck!!

Durum:

open

Orijinal gönderinin sahibi: Brad ,

Metin:

CONFIRMED.  Steam solenoid valve was the problem.  Please note that the replacement Jura part for USA must be the 120V version, not the 230V version used in Europe.   They are unfortunately more than twice the price from what @vauweh shared with us in his posts, and as of Jan 2021 both jura-parts.com and partsguru.com are out of stock.

Here is the USA part I used for my C9, but it’s designed for C, F, S and X machines

Jura-parts:  https://www.jura-parts.com/Jura-F-S-X-Series-Solenoid-Valve-p/10237.htm

Parts Guru:  https://shop.partsguru.com/Jura-Steam-Solenoid-Valve-120V-0010528.htm?categoryId=-1[br]

[br]

would be great to find a DIY approach here.

Durum:

open