Ana içeriğe geç
Yardım

Güncel sürümün sahibi: Charles Dill ,

Başlık:

Can anyone tell me how to replace board mounted USB3 B socket?

Metin:

My Fujitsu IX500 scanner was working great, but the USB3 B female socket had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Cihaz:

Soldering

Durum:

open

Kabul Edilen Cevap:

+686429

Düzenleyen: Charles Dill ,

Başlık:

Can anyone tell me how to replace board mounted USB3 B socket?

Metin:

My Fujitsu IX500 scanner was working great, but the USB3 B female socket had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Cihaz:

Soldering

Durum:

open

Kabul Edilen Cevap:

-701970

Düzenleyen: Charles Dill ,

Başlık:

Can anyone tell me how to replace board mounted USB3 B socket?

Metin:

My Fujitsu IX500 scanner was working great, but the USB3 B female socket had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Cihaz:

Soldering

Durum:

open

Kabul Edilen Cevap:

+701970

Düzenleyen: Charles Dill ,

Başlık:

Can anyone tell me how to replace board mounted USB3 B socket?

Metin:

My Fujitsu IX500 scanner was working great, but the USB3 B female socket had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Cihaz:

Soldering

Durum:

open

Kabul Edilen Cevap:

-686429

Düzenleyen: Charles Dill ,

Başlık:

Can anyone tell me how to replace board mounted USB3 B socket?

Metin:

My Fujitsu IX500 scanner was working great, but the USB3 B female socket had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Cihaz:

Soldering

Durum:

open

Kabul Edilen Cevap:

+686429

Düzenleyen: Charles Dill ,

Başlık:

-Can anyone tell me how to replace board mounted USB3 B port?
+Can anyone tell me how to replace board mounted USB3 B socket?

Metin:

-My Fujitsu IX500 scanner was working great, but the USB3 B female port had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.
+My Fujitsu IX500 scanner was working great, but the USB3 B female socket had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Cihaz:

Soldering

Durum:

open

Düzenleyen: Charles Dill ,

Başlık:

-Can anyone tell me how to replace board mounted USB B port?
+Can anyone tell me how to replace board mounted USB3 B port?

Metin:

-My Fujitsu IX500 scanner was working great, but the USB B female port had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.
+My Fujitsu IX500 scanner was working great, but the USB3 B female port had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this 9-pin + 2 post board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Cihaz:

Soldering

Durum:

open

Orijinal gönderinin sahibi: Charles Dill ,

Başlık:

Can anyone tell me how to replace board mounted USB B port?

Metin:

My Fujitsu IX500 scanner was working great, but the USB B female port had broken off leaving 4 bare wires without that center post. I have the logic board removed, and before diving into a soldering job, I am hoping for some tips replacing this board-mounted port. Since a replacement scanner is $500, I am willing pay a professional to do the repair if advised.

Cihaz:

Soldering

Durum:

open