Ana içeriğe geç
Yardım

Güncel sürümün sahibi: Richdave ,

Metin:

I have a host of LED Xmas lights up this year. Broadly falling into 2 types.
 
1. Power and controller (flash rate/pattern etc) in 1 unit - you'd need a DC-AC inverter to run these
 
2. Power adapter with the controller separated on the cable - look at the power adapter it should have a DC voltage and current (amps) spec on it.
 
[image|143059]
 
Some of mine are rated at 24VDC at 150mA so I could run them off a 24VCD supply and not the adapter quite easily
 
HIH

Durum:

open

Orijinal gönderinin sahibi: Richdave ,

Metin:

I have a host of LED Xmas lights up this year.  Broadly falling into 2 types.

1. Power and controller (flash rate/pattern etc) in 1 unit  - you'd need a DC-AC inverter to run these

2.  Power adapter with the controller separated on the cable - look at the power adapter it should have a DC voltage and current (amps) spec on it.

[image|143059]

Some of mine are rated at 24VDC at 150mA so I could run them off a 24VCD supply and not  the adapter quite easily

HIH

Durum:

open