Ana içeriğe geç
Yardım

Orijinal gönderinin sahibi: Adam Carrillo

Metin:

***''Resisting Maytag Bravos Quiet Series 300''***

''Hello,  ***This should help;***''

''***You will have to Reset the Spinning mechanism. it appears to be dormant!***  This normally happens when it is too heavy of a load or when it spins unbalanced usually sneakers are the cause for this to happen or both, making your washing mashine go into protective mode.''

***''Resisting Maytag Bravos Quiet Series 300:''***

* ***Set wash dial to NORMAL***
* ***Turn dial back one click to BULKY SHEETS***
* ***Turn dial forward three clicks to HAND WASH***
* ***Turn dial back one click to WRINKLE  CONTROL***
* ***Turn dial forward one click and Stop on HAND WASH***
* ''all lights should lid at this point and your washer would like to know what it is that you would like to reset and in your case would be your Spin.''
* ***''Now moving right along:''***
* ***(You will now move your Maytag Washing Cycle DIAL)***
* ***Turn Dial forward and go (''PASSED...'' COLD WASH and RINSE & SPIN) Stop at DRAIN & SPIN.***

*    ''this will reset all spin issues''

With today's technology you may also do the following, should you get stuck and assuming no warranty. And of course nothing to do with the above instructions.  This should work with any brand or unit.

# Unplug Washing machine Power cord
# Set Washing Cycle DIAL to OFF
# Remove half load of cloths (can place in a bucket, container or plasic bag
# Plug in your Washing machines Power cord

Set Wash Cycle Dial to a large Cycle and let it wash through adding your soaps and such.

''when the above wash Cycle is complete,''

''add the second half of clothes set your Washing Cycle accordingly treating it like a normal load.  Your Washing machine will adjust the wash Load according to your settings.''

''Your Washing Machine Should now work Normal again.''

Durum:

open