USB-A port stopped working. (USB xHCI Compliant Host Controller)
Metin:
Hi - Unsure why USB-A is can't be detected anymore.
# Tried reinstalling drivers
# Even removed the drivers manually so that correct driver can be reinstalled
# Reinstalled windows 11 from the scratch
# Ran Lenovo softwares for diagnostic, no issue found, all drivers are Up-to-date
# Tried to boot from USB, but port not detected
-
-
I think all possible combinations have been tried in BIOS
# Tried turning switching 'Always ON' flag in BIOS
# Disabling 'secure boot' to boot from the USB
# Restoring BIOS to previous version
# Upgrading BIOS
# Resetting BIOS to default
No other option seems to be related to USB-A in the BIOS.
+
Also tried:
+
+
I tried "USB Root Hub - Properties - Power Management and check if the box that says "Allow the computer to turn off this device to save power" is unchecked."
USB-A port stopped working. (USB xHCI Compliant Host Controller)
Metin:
Hi - Unsure why USB-A is can't be detected anymore.
# Tried reinstalling drivers
# Even removed the drivers manually so that correct driver can be reinstalled
# Reinstalled windows 11 from the scratch
# Ran Lenovo softwares for diagnostic, no issue found, all drivers are Up-to-date
# Tried to boot from USB, but port not detected
Did anybody else faced this issue?
Thanks
***Error:***
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.