Ana içeriğe geç

Orijinal gönderinin sahibi: rdklinc ,


If your AC adapter has no light, the most likely problem is that the DC-in/sound/IO module on the left side is not properly connected to the logic board.  This is the cable that connects to the underside of the left side of the logic's very tricky to get the connector securely seated in the socket.

I have no idea what the clicking sound was.  But really you shouldn't be connecting the battery at all until you have a computer that is powering on and functioning fine -- a battery at this point is just complicating the issue.

Also, don't put the computer back together until it's powering on, and also verify that the topcase is securely connected.  There's no point screwing a machine back together until you know it's working.