Ana içeriğe geç
Yardım

Güncel sürümün sahibi: oldturkey03 (oy detayları)

Başlık:

P key needs new nipple; contact works. How to replace?

Metin:

Hi all

I have a PB here with a P key not working. I've replaced the scissor mechanism but the problem is that the springy rubber nipple is damaged. When I press on the contact underneath, it does type Ps with apparent contentment.

I found a source at http://www.irithm.com/Mac.key.replacement.html
with pretty good instructions, but, while they can provide the nipple, they don't say how to install it. It appears to be glued onto the keyboard base. (ifixit only sells complete keyboards.)

Any suggestions?

Cihaz:

PowerBook G4 Titanium DVI

Durum:

open

Kabul Edilen Cevap:

+8145

Düzenleyen: Sterling Hirsh

Başlık:

P key needs new nipple; contact works. How to replace?

Metin:

Hi all

I have a PB here with a P key not working. I've replaced the scissor mechanism but the problem is that the springy rubber nipple is damaged. When I press on the contact underneath, it does type Ps with apparent contentment.

I found a source at http://www.irithm.com/Mac.key.replacement.html
with pretty good instructions, but, while they can provide the nipple, they don't say how to install it. It appears to be glued onto the keyboard base. (ifixit only sells complete keyboards.)

Any suggestions?

Cihaz:

PowerBook G4 Titanium DVI

Durum:

open

Düzenleyen: colleenthompson

Başlık:

P key needs new nipple; contact works. How to replace?

Metin:

Hi all
I have a PB here with a P key not working. I've replaced the scissor mechanism but the problem is that the springy rubber nipple is damaged. When I press on the contact underneath, it does type Ps with apparent contentment.
I found a source at http://www.irithm.com/Mac.key.replacement.html
with pretty good instructions, but, while they can provide the nipple, they don't say how to install it. It appears to be glued onto the keyboard base. (ifixit only sells complete keyboards.)
-Any suggetions?
+Any suggestions?

Cihaz:

PowerBook G4 Titanium DVI

Durum:

open

Düzenleyen: colleenthompson

Başlık:

P key needs new nipple; contact works. How to replace?

Metin:

Hi all
-I have a PB here with a P key not working. I've replace the scissor mechanism but the problem is the springy rubber nipple is damaged. When I press on the contact underneath, it does type Ps for me.
+I have a PB here with a P key not working. I've replaced the scissor mechanism but the problem is that the springy rubber nipple is damaged. When I press on the contact underneath, it does type Ps with apparent contentment.
I found a source at http://www.irithm.com/Mac.key.replacement.html
with pretty good instructions, but, while they can provide the nipple, they don't say how to install it. It appears to be glued onto the keyboard base. (ifixit only sells complete keyboards.)
Any suggetions?

Cihaz:

PowerBook G4 Titanium DVI

Durum:

open

Orijinal gönderinin sahibi: colleenthompson

Başlık:

P key needs new nipple; contact works. How to replace?

Metin:

Hi all

I have a PB here with a P key not working. I've replace the scissor mechanism but the problem is the springy rubber nipple is damaged. When I press on the contact underneath, it does type Ps for me.

I found a source at http://www.irithm.com/Mac.key.replacement.html
with pretty good instructions, but, while they can provide the nipple, they don't say how to install it. It appears to be glued onto the keyboard base. (ifixit only sells complete keyboards.)

Any suggetions?

Cihaz:

PowerBook G4 Titanium DVI

Durum:

open