So. I read all the comments and all of you are correct.
-
-
Including the ones that couldn't fix it.
+
So. I read all the comments and all of you point to something that is correct. Including the ones that mentioned that couldn't fix it.
So this is what I found in my Roomba 805.
-
Some that you already mentioned but, one thing that here was not listed it was the gear mechanism.
+
One thing was not mentioned, and that's why I am putting this here, it was the "gear mechanism" in the brushes dock.
-
So I took it apart like one of the fellows mention and put a video here, but mine was not full of gunk like the video, also because it's a different model and that compartment is properly sealed, but I found that one of the plastic gear, was rubbing against the plastic vase and because of so much friction kind of "melted" the area and became stuck.
+
So I took it apart, like one of the fellows mentioned, and put a video here about it, but mine was not full of gunk like he showed in the video. Probably because it's a different model and that compartment is properly sealed on my 805, but I found that one of the plastic gear, was rubbing against the plastic cover of the motor/gear assembly, and because of so much friction, it kind of "melted" the area and became stuck. Reason for the computer board to read that the motor is drawing more amps therefore popping the error code 2, "clean brushes" "clean brushes""clean brushes""clean brushes".
-
By scraping off the excess plastic build up, and adding extra grease, I made it work, and the error code didn't pop anymore, buy this is a manufacturer issue, and I am pretty sure sooner or later the grease will wear off and the issue will reaper.
+
By scraping off the excess plastic build up, and adding extra grease, I made it work, and the error code didn't pop anymore. But this is a manufacturer issue, and I am pretty sure sooner or later the grease will wear off and the issue will hunt me again.
-
So basically, buying a new brush dock will fix that for as long as it will work (God knows) and back to square one.
+
So basically, buying a new brush dock will fix that for as long as it will work (God knows).
So, this is my story.
May God bless you and your family, and the peace of Jesus Christ be with you forever.
OK brothers and sisters.
So. I read all the comments and all of you are correct.
Including the ones that couldn't fix it.
So this is what I found in my Roomba 805.
Some that you already mentioned but, one thing that here was not listed it was the gear mechanism.
So I took it apart like one of the fellows mention and put a video here, but mine was not full of gunk like the video, also because it's a different model and that compartment is properly sealed, but I found that one of the plastic gear, was rubbing against the plastic vase and because of so much friction kind of "melted" the area and became stuck.
By scraping off the excess plastic build up, and adding extra grease, I made it work, and the error code didn't pop anymore, buy this is a manufacturer issue, and I am pretty sure sooner or later the grease will wear off and the issue will reaper.
So basically, buying a new brush dock will fix that for as long as it will work (God knows) and back to square one.
So, this is my story.
May God bless you and your family, and the peace of Jesus Christ be with you forever.