Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Yardım

Güncel sürümün sahibi: Nick ,

Metin:

It's doable, yesIt can be done, but it's an advanced job you need a lot of experience to find the exact processor socket or model that fits and will work, andnot botch. Not only do you need specialto know how to do BGA rework and reflow equipment

It's too complicated
re-balling you also need to know how to recommend doing it on this vs a laptopwork with a socket, your best bet is sellBGA reflow station.
I personally recommend selling
this Mac and buying the one to cover the cost of a new Macyou want, or getlocating a very similar macmachine with the same board layout and screen type (Apple switched to yoursLED in 2008) with a crackedbroken screen and good logicboard and useto get the board you want. The risks that logicboard

if
a CPU replacement entail aren't worth it unless you wantalready know how to try this, it's your call, i don't suggestdo it personally due(most people don't)
If you decide
to the difficulty and risk

Think about this

If i upgrade a Toshiba laptop's CPU and it doesn't work too well, i don't need
try, you're on your own most likely. Many people here couldn't tell you how to do BGA rework and reflow gearsince they don't know how. This is yet another reason to fix it, just 2 screwdrivers, Flathead and Phillips, no BGA reflow gearrecommend against this.
It's doable, yesIt can be done, but it's an advanced job you need a lot of experience to find the exact processor socket or model that fits and will work, andnot botch. Not only do you need specialto know how to do BGA rework and reflow equipment

It's too complicated
re-balling you also need to know how to recommend doing it on this vs a laptopwork with a socket, your best bet is sellBGA reflow station.
I personally recommend selling
this Mac and buying the one to cover the cost of a new Macyou want, or getlocating a very similar macmachine with the same board layout and screen type (Apple switched to yoursLED in 2008) with a crackedbroken screen and good logicboard and useto get the board you want. The risks that logicboard

if
a CPU replacement entail aren't worth it unless you wantalready know how to try this, it's your call, i don't suggestdo it personally due(most people don't)
If you decide
to the difficulty and risk

Think about this

If i upgrade a Toshiba laptop's CPU and it doesn't work too well, i don't need
try, you're on your own most likely. Many people here couldn't tell you how to do BGA rework and reflow gearsince they don't know how. This is yet another reason to fix it, just 2 screwdrivers, Flathead and Phillips, no BGA reflow gearrecommend against this.

Durum:

open

Düzenleyen: Nick ,

Metin:

It's doable, yes, but you need to find the exact processor socket or model that fits and will work, and you need special BGA rework and reflow equipment
It's doable, yes, but you need to find the exact processor socket or model that fits and will work, and you need special BGA rework and reflow equipment
 
It's too complicated to recommend doing it on this vs a laptop with a socket, your best bet is sell this one to cover the cost of a new Mac, or get a very similar mac to yours with a cracked screen and good logicboard and use that logicboard
 
if you want to try this, it's your call, i don't suggest it personally due to the difficulty and risk
 
Think about this
 
If i upgrade a Toshiba laptop's CPU and it doesn't work too well, i don't need BGA rework and reflow gear to fix it, just 2 screwdrivers, Flathead and Phillips, no BGA reflow gear

Durum:

open

Düzenleyen: Nick ,

Metin:

It's doable, yes, but you need to find the exact processor socket or model that fits and will work, and you need special BGA rework equipment
 
It's too complicated to recommend doing it on this vs a laptop with a socket, your best bet is sell this one to cover the cost of a new Mac, or get a very similar mac to yours with a cracked screen and good logicboard and use that logicboard
 
if you want to try this, it's your call, i don't suggest it personally due to the difficulty and risk
 
Think about this
 
If i upgrade a Toshiba laptop's CPU and it doesn't work too well, i don't need BGA rework and reflow gear to fix it, just 2 screwdrivers, Flathead and Phillips, no BGA reflow gear
If i upgrade a Toshiba laptop's CPU and it doesn't work too well, i don't need BGA rework and reflow gear to fix it, just 2 screwdrivers, Flathead and Phillips, no BGA reflow gear

Durum:

open

Düzenleyen: Nick ,

Metin:

It's doable, yes, but you need to find the exact processor socket or model that fits and will work, and you need special BGA rework eqiptmentequipment
It's doable, yes, but you need to find the exact processor socket or model that fits and will work, and you need special BGA rework eqiptmentequipment
 
It's too complicated to recommend doing it on this vs a laptop with a socket, your best bet is sell this one to cover the cost of a new Mac, or get a very similar mac to yours with a cracked screen and good logicboard and use that logicboard
 
if you want to try this, it's your call, i don't suggest it personally due to the difficulty and risk
 
Think about this
If
If
i upgrade a toshibaToshiba laptop's CPU and it dosen'tdoesn't work too well, i don't need BGA rework gear to fix it, just 2 screwdrivers, flatheadFlathead and phillipsPhillips, no BGA reflow gear
If
If
i upgrade a toshibaToshiba laptop's CPU and it dosen'tdoesn't work too well, i don't need BGA rework gear to fix it, just 2 screwdrivers, flatheadFlathead and phillipsPhillips, no BGA reflow gear

Durum:

open

Düzenleyen: Nick ,

Metin:

It's doable, yes, but you need to find the exact processor socket or model that fits and will work, and you need special BGA rework eqiptment
 
It's too complicated to recommend doing it on this vs a laptop with a socket, your best bet is sell this one to cover the cost of a new Mac, or get a very soimilatsimilar mac to yours with a cracked screen and good logicboard and use that logicboard
It's too complicated to recommend doing it on this vs a laptop with a socket, your best bet is sell this one to cover the cost of a new Mac, or get a very soimilatsimilar mac to yours with a cracked screen and good logicboard and use that logicboard
 
if you want to try this, it's your call, i don't suggest it personally due to the difficulty and risk

Think about this
If i upgrade a toshiba laptop's CPU and it dosen't work too well, i don't need BGA rework gear to fix it, just 2 screwdrivers, flathead and phillips, no BGA reflow gear
if you want to try this, it's your call, i don't suggest it personally due to the difficulty and risk

Think about this
If i upgrade a toshiba laptop's CPU and it dosen't work too well, i don't need BGA rework gear to fix it, just 2 screwdrivers, flathead and phillips, no BGA reflow gear

Durum:

open

Düzenleyen: Nick ,

Metin:

It's doable, yes, but you need to find the exact processor socket or model that fits and will work, and you need special BGA rework eqiptment
 
It's too complicated to recommend doing it on this vs a laptop with a socket, your best bet is sell this one to cover the cost of a new Mac, or get a very soimilat mac to yours with a cracked screen and good logicboard and use that logicboard
 
if you want to try this, it's your call, i don't suggest it personally

Durum:

open

Düzenleyen: Nick ,

Metin:

It's doable, yes, but you need to find the exact processor socket or model that fits and will work, and you need special BGA rework eqiptment
 
It's too complicated to recommend doing it on this vs a laptop with a socket, your best bet is sell this one to cover the cost of a new MacMac, or get a very soimilat mac to yours with a cracked screen and good logicboard and use that logicboard
It's too complicated to recommend doing it on this vs a laptop with a socket, your best bet is sell this one to cover the cost of a new MacMac, or get a very soimilat mac to yours with a cracked screen and good logicboard and use that logicboard

Durum:

open

Orijinal gönderinin sahibi: Nick ,

Metin:

It's doable, yes, but you need to find the exact processor socket or model that fits and will work, and you need special BGA rework eqiptment

It's too complicated to recommend doing it on this vs a laptop with a socket, your best bet is sell this one to cover the cost of a new Mac

Durum:

open