Try testing the oven's [link|https://www.partselect.com/PS1570174-Whirlpool-12001656-Long-Oven-Sensor.htm?SourceCode=22&SearchTerm=MEW6630DDB&ModelNum=MEW6630DDB|temperature sensor].
-
I don't know what its resistance value is but it ''should not test open circuit'' i.e. OL or infinite Ohms shown on a DMM (digital multimeter)
+
I don't know what its resistance value is but it ''should not test open circuit'' i.e. OL or infinite Ohms shown on a DMM (digital multimeter)
-
I can't find the service sheet for the oven but with some other ovens, they will not start if the sensor is faulty as there's no way then that the control board can regulate the heat, but usually an error code is displayed but maybe the beeps are used in your oven instead, I don't know.
+
I can't find the service sheet for the oven but with some other ovens, they will not start if the sensor is faulty as there's no way then that the control board can regulate the heat, but usually an error code is displayed, maybe the beeps are used in your oven instead, I don't know.
The parts supplier link above is ''useful'' as it has a video that shows how to access the sensor so that you can test if it is OK or not. It also lists the ''manufacturer's part number'' for the sensor as well.
If the sensor is faulty, search online for the ''manufacturer's part number only'' to find suppliers that suit you best.
If the sensor is OK, the you may have to check that the 240V supplies i.e. 2 x 120V are getting to the oven's control board.
Here's the [link|https://www.manualslib.com/manual/421881/Maytag-Mew6627ddw-Electric-27-In-Double-Wall-Oven.html?page=11&term=15003244&selected=1#manual|wiring diagram] for the oven. I realize that it shows a different model number but it is also applicable to your model.
I'm assuming that the L1 feed is OK because the oven control board is beeping but you may have to check if the L2 feed is OK.
The L2 feed connects to the control board's yellow P1 plug pin 1 and the green P2 plug pin 1. Check if you measure 120V AC at those points.
Check the LI feed also just in case - white P10/1 and black P9/1.
''***Be safety aware as you are testing for lethal voltages.*** If you don't know how to do this safely, then don't do it! Call an electrician or oven repair service.''
If both the voltages are OK at the control board, then either the replacement board is also faulty or it's something else.
You may have to check that the 240V i.e. 2 x 120V, supplies are getting to the oven's control board.
+
Try testing the oven's [link|https://www.partselect.com/PS1570174-Whirlpool-12001656-Long-Oven-Sensor.htm?SourceCode=22&SearchTerm=MEW6630DDB&ModelNum=MEW6630DDB|temperature sensor].
-
Here's the [https://www.manualslib.com/manual/421881/Maytag-Mew6627ddw-Electric-27-In-Double-Wall-Oven.html?page=11&term=15003244&selected=1#manual|wiring diagram] for the oven. I realize that it shows a different model number but it is also applicable to your model.
+
I don't know what its resistance value is but it ''should not test open circuit'' i.e. OL or infinite Ohms shown on a DMM (digital multimeter)
+
+
I can't find the service sheet for the oven but with some other ovens, they will not start if the sensor is faulty as there's no way then that the control board can regulate the heat, but usually an error code is displayed but maybe the beeps are used in your oven instead, I don't know.
+
+
The parts supplier link above is ''useful'' as it has a video that shows how to access the sensor so that you can test if it is OK or not. It also lists the ''manufacturer's part number'' for the sensor as well.
+
+
If the sensor is faulty, search online for the ''manufacturer's part number only'' to find suppliers that suit you best.
+
+
If the sensor is OK, the you may have to check that the 240V supplies i.e. 2 x 120V are getting to the oven's control board.
+
+
Here's the [link|https://www.manualslib.com/manual/421881/Maytag-Mew6627ddw-Electric-27-In-Double-Wall-Oven.html?page=11&term=15003244&selected=1#manual|wiring diagram] for the oven. I realize that it shows a different model number but it is also applicable to your model.
I'm assuming that the L1 feed is OK because the oven control board is beeping but you may have to check if the L2 feed is OK.
The L2 feed connects to the control board's yellow P1 plug pin 1 and the green P2 plug pin 1. Check if you measure 120V AC at those points.
Check the LI feed also just in case - white P10/1 and black P9/1.
''***Be safety aware as you are testing for lethal voltages.*** If you don't know how to do this safely, then don't do it! Call an electrician or oven repair service.''
-
If both the voltages are OK at the control board, then either the replacement board is faulty or perhaps there's another problem e.g. the oven [https://www.partselect.com/PS1570174-Whirlpool-12001656-Long-Oven-Sensor.htm?SourceCode=22&SearchTerm=MEW6630DDB&ModelNum=MEW6630DDB|temperature sensor].
-
-
''Try testing the sensor first as it is the safer option.'' I don't know what its resistance value is but it shouldn't test open circuit i.e. OL or infinite Ohms ;-)
-
-
I can't find the service sheet for the oven but with some other ovens, they will not start if the sensor is faulty as there's no way then that the control board can regulate the heat, but usually an error code is displayed but maybe the beeps are used in your oven instead, I don't know.
-
-
The parts supplier link is ''useful'' as it has a video that shows how to access the sensor so that you can test if it is OK. It also lists the ''manufacturer's part number'' for the sensor as well.
-
-
If the sensor is faulty, search online for the ''part number only'' to find suppliers that suit you best.
+
If both the voltages are OK at the control board, then either the replacement board is also faulty or it's something else.
Hi @heather610
You may have to check that the 240V i.e. 2 x 120V, supplies are getting to the oven's control board.
Here's the [https://www.manualslib.com/manual/421881/Maytag-Mew6627ddw-Electric-27-In-Double-Wall-Oven.html?page=11&term=15003244&selected=1#manual|wiring diagram] for the oven. I realize that it shows a different model number but it is also applicable to your model.
I'm assuming that the L1 feed is OK because the oven control board is beeping but you may have to check if the L2 feed is OK.
The L2 feed connects to the control board's yellow P1 plug pin 1 and the green P2 plug pin 1. Check if you measure 120V AC at those points.
Check the LI feed also just in case - white P10/1 and black P9/1.
''***Be safety aware as you are testing for lethal voltages.*** If you don't know how to do this safely, then don't do it! Call an electrician or oven repair service.''
If both the voltages are OK at the control board, then either the replacement board is faulty or perhaps there's another problem e.g. the oven [https://www.partselect.com/PS1570174-Whirlpool-12001656-Long-Oven-Sensor.htm?SourceCode=22&SearchTerm=MEW6630DDB&ModelNum=MEW6630DDB|temperature sensor].
''Try testing the sensor first as it is the safer option.'' I don't know what its resistance value is but it shouldn't test open circuit i.e. OL or infinite Ohms ;-)
I can't find the service sheet for the oven but with some other ovens, they will not start if the sensor is faulty as there's no way then that the control board can regulate the heat, but usually an error code is displayed but maybe the beeps are used in your oven instead, I don't know.
The parts supplier link is ''useful'' as it has a video that shows how to access the sensor so that you can test if it is OK. It also lists the ''manufacturer's part number'' for the sensor as well.
If the sensor is faulty, search online for the ''part number only'' to find suppliers that suit you best.