Sure from the outside things look good, but if you really looked inside you’ll see a mess!
-
The question is how far and skilled are you in fixing your own system? This will take a lot of different skills as you will need to disassemble the system quite far to even evaluate how bad things are. Clearly you will need a new battery and depending on your skill level you will likely need micro soldering skills and access to the needed replacement SMD devices which are damaged or just bite the bullet and replace the logic board, which at that point I think will be more than you would want to stand repairing this system.
+
The question is how far and skilled are you in fixing your own system? This will take a lot of different skills as you will need to disassemble the system quite far to even evaluate how bad things are. Clearly you will need a new battery and depending on your skill level you will likely need micro soldering skills and access to the needed replacement SMD devices which are damaged or just bite the bullet and replace the logic board, which at that point I think will be more than you would want to spend repairing this system.
So… if you want to dive into the deep end you’ll need to spend sometime reviewing the guides and opening the system up carefully removing the logic board out so you can inspect both sides. Post some nice clear detailed images here so we can see the areas that are damaged so we can see what’s needed.
Ouch! Not good😩
Sure from the outside things look good, but if you really looked inside you’ll see a mess!
The question is how far and skilled are you in fixing your own system? This will take a lot of different skills as you will need to disassemble the system quite far to even evaluate how bad things are. Clearly you will need a new battery and depending on your skill level you will likely need micro soldering skills and access to the needed replacement SMD devices which are damaged or just bite the bullet and replace the logic board, which at that point I think will be more than you would want to stand repairing this system.
So… if you want to dive into the deep end you’ll need to spend sometime reviewing the guides and opening the system up carefully removing the logic board out so you can inspect both sides. Post some nice clear detailed images here so we can see the areas that are damaged so we can see what’s needed.