Ana içeriğe geç
Yardım

Güncel sürümün sahibi: Andrew Optimus Goldheart ,

Başlık:

Why does airport card crash the computer?

Metin:

I replaced my logic board and then also had to replace a hard drive that was having a hard time booting up.  When I went to start up after finishing-nothing, no power.  I thought i had not connected the power on the logic board properly so I took apart and this time started up fine while still disassembled. It turns out that when the airport card is in-no power.  If the machine is running and I plug airport in-power is zapped!  A little magnet had been stuck in the airport slot and some of the connectors had been bent and were touching.  I straightened them but no success.  Is there a way to know if the card is bad--it worked fine before the new hard drive-even with the new logic board installed?  I do not want to buy a new card if it is somehting else.  Thanks for your help

Cihaz:

-iBook G3 12" A1005 900MHz
+iBook G3 12"

Durum:

open

Kabul Edilen Cevap:

101205

Düzenleyen: oldturkey03 (oy detayları) ,

Başlık:

Why does airport card crash the computer?

Metin:

I replaced my logic board and then also had to replace a hard drive that was having a hard time booting up.  When I went to start up after finishing-nothing, no power.  I thought i had not connected the power on the logic board properly so I took apart and this time started up fine while still disassembled. It turns out that when the airport card is in-no power.  If the machine is running and I plug airport in-power is zapped!  A little magnet had been stuck in the airport slot and some of the connectors had been bent and were touching.  I straightened them but no success.  Is there a way to know if the card is bad--it worked fine before the new hard drive-even with the new logic board installed?  I do not want to buy a new card if it is somehting else.  Thanks for your help

Cihaz:

iBook G3 12" A1005 900MHz

Durum:

open

Kabul Edilen Cevap:

+101205

Düzenleyen: originalmachead ,

Başlık:

Why does airport card crash the computer?

Metin:

I replaced my logic board and then also had to replace a hard drive that was having a hard time booting up.  When I went to start up after finishing-nothing, no power.  I thought i had not connected the power on the logic board properly so I took apart and this time started up fine while still disassembled. It turns out that when the airport card is in-no power.  If the machine is running and I plug airport in-power is zapped!  A little magnet had been stuck in the airport slot and some of the connectors had been bent and were touching.  I straightened them but no success.  Is there a way to know if the card is bad--it worked fine before the new hard drive-even with the new logic board installed?  I do not want to buy a new card if it is somehting else.  Thanks for your help

Cihaz:

iBook G3 12" A1005 900MHz

Durum:

open

Orijinal gönderinin sahibi: ndwig ,

Başlık:

Why does airport card crash the computer?

Metin:

I replaced my logic board and then also had to replace a hard drive that was having a hard time booting up.  When I went to start up after finishing-nothing, no power.  I thought i had not connected the power on the logic board properly so I took apart and this time started up fine while still disassembled. It turns out that when the airport card is in-no power.  If the machine is running and I plug airport in-power is zapped!  A little magnet had been stuck in the airport slot and some of the connectors had been bent and were touching.  I straightened them but no success.  Is there a way to know if the card is bad--it worked fine before the new hard drive-even with the new logic board installed?  I do not want to buy a new card if it is somehting else.  Thanks for your help

Cihaz:

iBook G3 12" A1005 900MHz

Durum:

open