iPod screen with no glare

I replaced the iPod screen usually are put enchergo oq have it if I'm in a very good luminado, and I still have trouble seeing, she is dull, already increased the brightness at maximum, however the ipod does not change anything. what do you? Thanks

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

cassiolutk, if your screen is still dark, and only visible when illuminated from an outside source, it is your backlight. It is possible that you have a bad LCD, even so you just replaced it. Check the connector on the circuit board for corrosion. Check inside the connector. Clean the circuit board thouroughly with isopropyl alcohol. If that does not resolve it, the backlight circuit on your logic board has failed. You could check for a bad backlight coil/IC or replace the board. Hope this helps, good luck.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

cassiolutk sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 697