Eşyalarını Tamir Et Topluluk Mağaza

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 Soru Tümünü görüntüle
Soru Kapandı

Seçenekler

Screen not working after fall, But digitizer still does...

Alright so my sister is clumsy and dropped her ipad, the screen shows nothing and once and awhile on a reboot for a split second goes blue and it is apparently the boot screen, it then goes totally dark. I have trouble shooted a little and found that it actually turns on and everything is working except the screen.

What I'm thinking is a connector or ribbon cable became unseated during the fall.

What's your opinion?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

sounds like a back light issue to me.

1 of 2 things can fix this.

1. install a new screen assembly and its easy as that :)

2. the backlight IC is damamged on the mother board. this will entail that it needs an advanced repair done that requires very skilled hands.

try the first one and see if that works, but if not look on ebay or local repair shops if you need to do number 2.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

Try replacing the LCD only. Not the assembly. the screen isn't an assembly on the ipad 2 if these other two do not work.

1. Something similar happened to my friends IPhone and I just disconnected the lcd cable and reconnected, disconnected the battery, and it worked afterwards.

2. it might need a new display data cable only, but I'm not sure how that would get damaged during the fall

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,024