Why is trackpad not working after HD replaced?

I followed the iFixit steps to replace the HD on my PowerBook G4. The new HD is working (hooray!) and I have reinstalled the OS (10.4). Everything seems to be working except the trackpad.

If I backtrack on the HD installation which Step (of the 22 steps) should I look back at? It's not clear which step(s) might have bothered with the functioning of the trackpad.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

The point at which you may have disturbed the trackpad is in step 12, where the trackpad ribbon cable is disconnected. The first thing to try would be opening the upper case back up and double-checking this connection. If it is plugged in, try cleaning the contacts on the cable and the logic board, and examine the cable and connector for any damage.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

kah sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 708